Okay factory guys or gals. I have a 3670RL, 2010 vintage. I would like to put in the second leg and motor ODS. my problem: can't even see the landing gear! The propane in closure prevent outside access. There is a welded steel panel in the blocking access from the front compartment.
Pictures...
The metal piece that transitions from the roof to the side of my rig appears to have come loose. It appears that it may be some sort of an aluminum material the runs down the entire top of the rig and on both side. I can push on the roof edge and it will "click" and bottom out on the wood roof...
First, my deepest condolences to all those that may have lost a loved one in any of our past wars. You may have lost them to DEATH, a PHYSICAL INJURY,, BIOLOGICAL OR CHEMICAL or perhaps even to PTSD... They are all tragic losses just the same, and should be honored and not forgotten just the...
Has anyone had any problems with their spring shackles wearing because of misaligned springs. We are on our way to Texas for the winter and are now in Kokomo, Indiana.
Okay I shorted between the battery and the ground. :mad::mad::confused::mad::mad: 12 volt things worked great untill 36 hours later when the batteries were dead. converter not humming or running. good power to the converter via 110. charging batteries with a 6 amp battery charger. Slow but...
Heading to PEI WITH THE BUXTONS from CO. we went to the Michigan rally with them. While there they says"come to PEI with us". So here we are in new Hampshire heading to Maine tomorrow. Did mt Washington today. What a grin. Later!
yup we are in the count down mode. Just 59 days till we leave for Rockport Texas! We will be traveling across the northern tier of states till we head south to Texas. We are in our planning stages and just wondering if any one has a "must see". We want to start a Bucket List for Debbie and I...
Okay, I got me an EMS after hearing all the stories. I read the instructions, not once or twice but several times.
my question, with the wire so stiff how does one make it bend where it needs to without breaking something?
How do you get both of the round things with the holes in them to fit...
Okay where to start. Just bought one of them Black and Decker thermo leak scanner for checking for air leaks etc. What I found was this:
1: The duct work that goes to the bedroom; on the door side it appears that the duct goes all the way to the closed and ends there. That is about 6 feet or...
Okay boys and girls, I a have a heavy item that needs to go to Texas (fifth wheel hitch). What would be the best (read least expensive) method to get it there? Anyone going that way? I will give you some fuel money even.
I have a lightly used 18K "SUPER GLIDE" FIFTH WHEEL HITCH for sale. This includes the frame mount kit, rails and capture plate. My new truck included a hitch so I no longer need the "super glide". Call or email. I am in Mid-Michigan.
$800.00.
810-691-3441
ergalant1951@tds.net
This is both an "FYI" and "what do ya think" kind of post. Last year in Texas I started to squirt a lubricating/penetrating oil into each one of the cables where they pass through the dock center (if that makes sense). I would do this as I was waiting for the tanks to dump not sure but I think...
I have been wondering this for a while now and perhaps you Vietnam Vets who belong to the Heartland Owners club will help me determine this. Just kinda wanted to know how many of us are out there with past service in Viet Nam, what unit and where...
What is the best way to attach a shelf to the headboard in the owners suite. I saw it once before as someones MOD but could not locate it. So what is the best way to attach a shelf to the headboard. thank you!!!!
I am having problems with my floor in the cargo/basement area starting to sag. How much weight should this floor support? Should I worry about stuff falling through?
Has anyone else had or is having the frame that goes around their slam doors rust? I guess that I assumed when I bought my rig that the door frames were aluminum, I was sadly mistaken. Mine are rusting. I also need to find some sort of replacement seal for the doors. mine fell apart.
http://menards.com/main/lighting-fans/indoor-lights/accent-lights/motion-sensor-light/p-1468695-c-7490.htm
We have several of these located around our fifth wheel. Not only are they motion sensing and automatic and run on batteries, but they can just be snatched off the wall, etc and used as a...
I often wonder what the price difference is between bi0-diesel and 100% diesel. I also would like to know your opinions on which is better for our trucks etc. I personally only try and use 100% diesel.
Does anyone know how to repair the faux maple or oak trip that goes around the slide perimeter on the inside. A good size chunk of mine broke off when a chair shifted. It is some sort of a polystyrene or something and is pretty brittle. I may just have to put the real deal in.
Anyone know where I can get the rubber gasket material with the metal insert (looks like a row of staples) for the ODS slam door on a 3670? For some reason they are rusting and just plain falling apart. We are getting ready to leave for Texas in two weeks. YEEEEEEEEEEEEEEEEEE...
Oke, se sèlman yon ti plis semèn ak nou pral desann nan tit Texas. Ta renmen kite alantou an nan 20yèm oswa 21yèm mwa oktòb la. Jis yo te rete tann ak wè.
Has anyone heard of a recall:eek: on the 6.7L cummins turbo? I have been having my MIL light cycle on and off constantly:mad:. took it to the dealer and he said "dont worry about it.":mad: Then a couple of days ago I got a letter from an attorney regarding a class action lawsuit:rolleyes...
I have a 2010 big horn 3670. Can anyone tell me if they have had problems withtheir side wall exterior skin cracking. And if so is it caused by what???
Has anyone done the Natchez Trace? We are thinking about heading back to Michigan via Galveston, then new orleans then up to the Nashville via the Natchez trace, then off to Michigan. Thanks
Once in a while I will lose water pressure when connected to the city water, in other words I lose all water.. I will go outside and check the hose bib I am hooked to and I have plenty of water pressure. Is it possible my check valve is going bad or what. Driving me nucking futs. warrenty...
I am having problems opening the door on my microwave oven. Has any one else had problems with this. I have to insert my finger nails (what little I have) between the door and the frame in order to open the door. What kind of warranty does this thing have. Gosh I hope it is more than 90...
Hey all. We have now decided to go and stop in Lake City, Fl and leave our 5th wheel while we go on our cruise that departs on March 13.
Wondering about the roads and highways between Rockport, Texas and Lake City. Also some possible cant miss places as well as good places to stay. We like...
The belly is full of water just behind the spare tire to the end of the trailer on our 3670.
There must be about a 6 to 8 inch bulge under there. It takes a lot of pressure to raise the bulge and when I do water pours out from between the plastic and the i-beam frame.
Should I have the...
Okey all of you experts out there, here ya go.
I am thinking about getting a "trail-air triglide". I currently have the stock pin-box on my 3670rl. The hitch is have is the pull-rite super glide. The capture plate is the "universal plate" from pull-rite.
I checked with a service tech at a...
Lefty:
I filed for the hypertension almost a year ago. The last time I heard from them they said that it was not included yet. And so the wait continues
Just to let ya all know that I Tried to find this question by searching first,
Question:
What are the dimensions of the pin box for the 3670'? I am talking the distance from :
c/L pin to c/L of first column of bolt holes.
c/L pin to c/L of second column of bolt holes...
We are wintering in Texas until March. DW and I are planning on a cruise leaving from Miami in Mid March. I was thinking about extending our trip south as long as we are that far south and do the KEYS for a few weeks.
Only problem is what to do with our y'all first for some ideas on both...
Just gained me some new storage space under the steps of my BH3670. All I had to do is remove 4 screws (two from each step) and put a piano hinge on the back side of each step and fasten it to the riser and presto more room to put stuff! Maybe even a safe could go in there with a hidden...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.