Search results

Thanks to everyone for your help.

I'm installing transfer switch model CSW-TS15 in my BH, on the transfer switch there's two pigtails with connectors on the end (AC in AC out) I would need two connectors that would be compatible to the ones on the transfer switch. davidg

I have a JC Refrigeration cooling unit for Dometic 3962 refrigerator has another 16 months warranty left, asking $150.00 interested PM me.

Thanks for all of the help.

I recently installed a residential refa in my BH now I want to install an inverter/charger to run it only, my questions are: Do I do away with the converter? Will everything that runs on 12V work (lights ect.) if I do away with the converter? Which inverter should I go with? Thanks in advance, david

I do have a key just want a spare. Thanks to everyone

I'm in need of one entry door key for my BH, at one time I had the information I need and can no longer find it, can anyone out there help me. Thanks in advance, davidg

That service manual download really helped. Thanks again

Thanks Gogie

It operates on gas but not sure it would do the same, that's a good idea I'll try it on gas and see. Thanks

I'm having an issue with my refrigerator, at least once a week in the early morning (like 6 or 7 AM never in the afternoon) the temperature is 41-42-43 normally 36-37. I was able to get it once when it was off and unit was cold (majority of the time it back on catching up) checked for voltage I...

Thanks to everyone, I now have an idea on what to do, you have been great help.

Make is Progressive Dynamics, model is 9100, no lights on and plugged in to shore power for several days it reads 13.1v, battery fully charged I would imagine, and as I said earlier 13.0v with inside lights on. I may be having an optical illusion. Any more questions just ask thanks for the replies.

I've searched forum and can't seem to find what I need. Does anyone out there know how much the converter should be charging when all of the inside lights are on? My lights seem to be dim, I checked voltage with all lights (inside) on and it read 13.0v. All help will be appreciated, davidg

Told you I would update when update available. Well C W had battery hooked up wrong, positive post grounded.

Gus told you guys I would give update when available. Well C W had battery hooked up wrong, the positive post was grounded. Easy fix if nothing is screwed up. I would like to correct my error he was not plugged into 220v 120v. Thanks for your reply

S-I-L is at work I will try and get him to bring his TT here and plug it in, what I have here works. Will give you guys update when available. Thanks again

Thanks Gus for your reply, I will need to get out there and check the outlet he plugged into and see what fuses he burnt.

Thanks Dave for your reply, I was told he plugged in a 50 amp outlet and blew two 40 amp fuses and I don't know which ones.

Daughter and son-in-law just purchased Sundance TT, went through walk through everything worked fine, after getting it home and plugged it in it burnt two forty-amp fuses. (Now keep in mind I was not there all I know is the fuses burnt) I'm a BH owner and not familiar with later Sundance...

Ours is a 3055RL if this will help. I did read that post that said it was located behind the breaker panel, I pulled the panel out and didn't see anything that looked like a module. Thanks for your reply, davidg

The isle light in our 2011 BH does not work all of the time and I'm thinking it's the module, can anyone tell me where the module is located? Thanks in advance, Davidg

We have a 2011 BH and I would need to replace the isle light control module, from what you said it's located behind the electrical panel, is that correct and does anyone know where I can get one of those? davidg

Thanks for your reply, I did locate one.

I'm looking for a circuit board for my Dometic refrigerator model # RM 3962LB Part # 50-051302-D if anyone out there can I will appreciate it. Thanks David

I'll put in my two cents also, we bring one of our receivers from the house (Direct), used the tripod for years, the more you use it the better you will get at it. We also have the app on our phone which will fine your satellite. We use the TV for the signal meter, with remote on press menu...

Andy, Susan and I will be there, we missed your spring rally last yr. we won't let that happen this yr. David

Andy, David and Susan will be there for the camp out. C-Ya

Yes, it's all good here, we did get thirteen and one half inch of light to heavy rain giving it time to drain. Our thoughts and prayers go out to all of those affected. Thanks for asking, David g

12 ton bottle jack under the axle between the U-bolts, this is the way I do it and been doing it for many years never had any problems, other members may have different opinions. David

Don't know where you converter is, but mine is under toilet, toilet leaked wet converter and fried it.

On my 3055 BH w/6000 axles it's 70 ft. lb. max on U-bolts. David

Ken, Try rubbing alcohol on a small area. David

Tony, We have a 2011 BH and had this happen on the same side as yours, only on both the front and the rear axles, on two different occasions. This was telling me there was a problem, what I did was add a short piece of metal with holes on opposite ends bolted it down where the shock is now...

I had this problem and what made it better was to have the trailer as level as possible when filling the fresh water tank, (this could be the reason they had no problem putting water, trailer may have been in different position) depending on the where or how the vent/vents are placed on the tank...

Hi Vince, one way to check and see what the level of propane in the tank is, put water in a pot and heat it to a boil on the stove, then pour the water down the side of the propane bottle when this is done (carefully now top will be hot) slide your hand down the side of the bottle when you will...

I would start by checking caulking on the outside/top of the slide, chances are water came from up and worked its way down to the floor, I personally would not start under the bed first. I'm sure you will have others to give you more advice. David

I've had both and prefer the power awning, reason being DW can put it in or out when she wants, one less chore for me to do. Davidg

Measure from center to center of the holes and the width. I replaced my 4 leaf with 5 leaf works great. For the best results bring one of the old ones to any dealer that sells the smaller trailers, they should be able to fix you up. Davidg

Ray & Gus have a good plan, go for it. Davidg