Search results

I am curious where you are getting your info that several people die each year due to having hydraulic fluid injected into their skin.

Chances are you have a defective faucet. Shut of the water, Remove the handles from the faucet. The handles have a hole in the side with a set screw that attaches them, you will need an Allen Key to remove them. Once remove you will see two plastic nuts. Remove the nuts and you should now be...

I have used Blue Beacon several times and I have also used Eagle. I use the standard wash and they have done an excellent job. I have never had an issue with Decals or any other component. I will continue to use them.

I have had bad crimps. One other thing to note, make sure your TV is set to cable and it is not on the antenna. Tony

This is an ongoing issue with most makes of RV' with bedroom slides that ride on rollers. The best solution is to use a strip of aluminum grade 6061 approx 7" wide X 1/8" thick. You will have to measure the length. This is a very hard aluminum and will distribute the load over a wider area...

They are not mounted upside down, they are designed this way. If you take one apart you will see that the red or hotwater cartridge is on the left hand side. They are also designed that when you turn them on the handles would be pointing downward. If you reverse it, the handles will be pointed...

Re: Manual over ride of the Hydraulicx Hi Doug, It is not a difficult job, but it was very time consuming. You have to drop the coroplast and this was difficult to remove, several of the bolts sheared off when the techs tried to remove them. Mine took longer than most because of the mess the...

Re: Manual over ride of the Hydraulicx Bill, You are correct, the hose came right out of the crimp, so yes it was a bad crimp. I am not sure but I think Heartland make up their own hoses. Tony

Re: Manual over ride of the Hydraulicx Update - The hydraulics are fixed and we have our main slude open again. The crimped fitting end had failed and the hose was lying loose on the bottom of the coroplast. It was a mess with hydraulic fluid covering most of the bottom. We had a new hose...

Re: Manual over ride of the Hydraulicx Hi Dougs, The leak is somewhere under the black coroplast. My guess it is the cylinder that has a blown seal or a hose has come apart at the crimped end. I am saying this because of the speed at which the fluid disappears. When we stopped today at this...

Re: Manual over ride of the Hydraulicx Thank you for the quick response, I know which slide is causing the problem and it is the main slide, I have no access to the living area. If there is no external manual over ride then it is a very poor design, Failures are guaranteed to happen and a work...

We are currently in route to Colorado Springs and our hydraulics have sprung a leak. I had to add two quarts of fluid just get get the slides and landing legs retracted. We are now stuck with the slides in with no access to the living area and no way to unhitch the truck. Is there a manual way...

Re: Welcome Wayne and Gayle Wayne and Gayle, Congratulations on your new position. Based on our few brief encounters, I am sure that you will both do an excellent job. If Sharon and I can do anything to help, please do no hesitate to contcat us. Tony

Sharon and I would like to inform everyone that we are resigning as the Canada Regional Directors. We have met some very nice owners in our short stay with the group. The reason for this decision is we are opening an RV Dealership and we will be selling some of the Haertland products. We felt...

Congratulations Michele & Burke. See you in Kingston at the Titanium Re-union in a few weeks. Travel safe and enjoy your new Titanium Edition.

The simple answer is yes, as to when this will happen is the big question.

I am looking for a chapter leader in the Province of Quebec and I am taking nominations. To be a Chapter Leader you must be a Heartland Club Member. The person we are looking for would possess: A. A friendly demeanor B. A non-combative, customer friendly style C. Good written and verbal...

The Big Horn BH Ti32 is now available on dealer lots, this unit is based on the 30E35SA from Glendale with some nice improvements.

Jim, The Titanium that is behind you are friends of ours, We will see them and you on Saturday morning.

The graphics on the front cap have changed. I think this is a great improvement over the original. Tony

Awesome Jon and Helen, great that you will be able to join us.

Thank you to everyone for your warm wishes. Sharon and I are very excited to have been appointed as the Canada Region Director and we looking forward to meeting many of you as we travel the highways and byways of this great land. To give you a little background on Sharon and myself. We are...

Wayne & Gayle, We Plan on attending your rally. I will make a reservation tomorrow.

Mickey & Bonnie, Not sure if you remember us, we were the ones with the new Big Horn Titanium Edition at the Tampa RV show. We plan on stopping by on Saturday to say hello if that is OK with you. We will not be bringing our coach. Tony & Sharon

Attached is the new flier for the BH Ti32, Please note the file size is 1.9MB Tony

Full body paint is availabe as an option. I do not have any idea what the MSRP would be for the paint option.

I don't think you will see anything other than the standard dinette table with 4 chairs.

It is time to do a little bit of a critique on the New Big Horn Titanium after living in for a month now and towing it 2500 kms. It looks to us that Heartland has taken a great product and improved upon it. Let me start off by saying that this is the first Titanium that we have ever owned...

Larry, I was suppose to get full body paint, however the time frame was too short, I needed to have this prototype before Christmas. I will write a critique on it over the next few days. The one thing that I can say, this is the first trailer that I ever owned that I didn't have to fix something...

I don't have a pin weight for this unit, it does seem to be around the 2000 to 2100 lb mark based on the other trailers that I have towed with this truck and that is several different Titanium's. I would have to say that the picture angle has something to do with why the truck looks low on the...

I am sure many of you have been waiting to see and exterior picture.

As promised, here are some interior pics of the new Titanium. Your comments on these pics would be appreciated. Tony

The new Big Horn Titanium Edition is now sitting in our driveway. This is still not the final product, they still have to make design changes to the storage space both inside and outside the trailer. we are impressed with the quality of the rig. Excellent workmanship. Now to load load it up and...

No wind noise. Like Bill said, the pin weight is not really any different from other 5th wheels. For now the 32 ft pin to bumper is the only length for this unit. Thye will most like make a larger unit probaly in the 34 ft length. They are curently manufacturing a Cyclone Toy Hauler in the 35 ft...

Ask me any questions you want, I will do my best to answer them. The big advantage of this coach is it 5 ft shoter tow length compared to a conventional 5th wheel. It is alo more aerodynamic. I have towed this type of coach more than 200000 km's and love the way it handles. As for pics, I...

The length is 32 ft pin to bumper and 37 ft living space. I currently don't have a pin weight. Tony

We have owned several Titanium's and putting the slide out 10 or 12 inches only takes a few seconds. For us it has not been a big issue. We buy it because we like a floor plan. We currently have on order the BH Ti32. The Titanium that we just traded and the one before that had the same type of...

Here are a couple of pics of the pull out desk top. Tony

I will post lots of pics late Monday from the Louisville manufacturers show.

We have owned 6 Titaniums so far and closet space was never an issue. We will be buying a BH Ti32 as soon as they become available.