Results 1 to 4 of 4

Thread: A Big Thank You to Mr. Beletti

  1. Print this Post   #1
    Retired Canada-East Region Directors rfournelle's Avatar
    Join Date
    May 2008
    Location
    CAN - ON
    Posts
    437

    A Big Thank You to Mr. Beletti

    I had a problem when I arrived at the KOA today. One of my hydraulic lines had been leaking and the hydraulic system was no longer functioning. This meant that I could not lower the various jacks (I have the level up system from Lippert installed last year) nor open the slides.

    Jim was driving by in his cart and came to welcome me in. When he heard about the problem, he was quickly on the phone to Bob Tiedge and with his help, managed to jump start the hydraulic motor to enable me to set up my unit. All this was done in about 20 minutes!

    Thank you Jim. You lived up to your reputation of being a gentlemen and always eager to help an owner in needs.

    Sincerely, Bob
    Bob & Christine
    Parker (gone but not forgotten) & Logan the Border Collies
    Member # 1047
    2018 GMC Denali 3500HD 4x4 Duramax
    2015 Bighorn 3585RL

  2. Print this Post   #2
    Senior Member Tom of Ypsi's Avatar
    Join Date
    Nov 2004
    Location
    USA - SD
    Posts
    1,355

    Re: A Big Thank You to Mr. Beletti

    For the rest of us that has the Level up system tell us how you fixed the problem and is it a temporary fix or permanent.
    [States stayed in while fulltiming

    Tom & Judy
    HOC 1048
    SKP 96639


    2008 F-450, 4X4, 4:30 rear, Utility Bodywerks, air ride, backup camera and more
    2005 Landmark Classic, Mt Rushmore #9284 Born Feb 2005 SOLD
    2011 MOBILE SUITE 36RSSB3 with vanity slide


    Fulltiming and loving it

  3. Print this Post   #3

    Re: A Big Thank You to Mr. Beletti

    You're very welcome Bob.

    Tom,

    Bob had what seemed like no DC power to his hydraulic system. I checked for power at the hot in the center of the large relay to ground and nothing. Checked both batteries - good. Traced the hot feeding the relay to the hot buss. Had power into the buss, power into all the mini-breakers but no power out of the breaker feeding the hydraulics relay.

    I had a heavy gauge jumper with ring terminals and I used it as a test jumper from the relay to the input of the breaker. Perfect. Had power. Then I wired it from the relay to the battery and left it that way - effectively and temporarily, power the system around the apparently bad auto-resetting mini-breaker.

    Jim

  4. Print this Post   #4
    Senior Member Tom of Ypsi's Avatar
    Join Date
    Nov 2004
    Location
    USA - SD
    Posts
    1,355

    Re: A Big Thank You to Mr. Beletti

    Thanks for the info Jim now everyone with the level up system will have some place to start looking for a fix should the need arise.
    [States stayed in while fulltiming

    Tom & Judy
    HOC 1048
    SKP 96639


    2008 F-450, 4X4, 4:30 rear, Utility Bodywerks, air ride, backup camera and more
    2005 Landmark Classic, Mt Rushmore #9284 Born Feb 2005 SOLD
    2011 MOBILE SUITE 36RSSB3 with vanity slide


    Fulltiming and loving it

Similar Threads

  1. Jim Beletti Rocks!
    By Cheryl in forum Heartland General Forum
    Replies: 18
    Last Post: 07-11-2009, 07:14 PM
  2. Username change for Jim Beletti to jbeletti
    By jbeletti in forum System Announcements
    Replies: 5
    Last Post: 06-13-2009, 11:31 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •