Sundance - Dump Pull Handles

I have a 2011 RK 265 and brought it home last Dec. only to put it in storage. I did notice at the dealers that one of the three dump handles was missing, and when I got home another had came lose and fell off.
I have the two replacement handles coming from my dealer. I have not looked I guess they have a threaded end that screws on a shaft to move the valve.
My question is do I install these new handles with some lock tight to prevent this from happening again .
Has anyone else had this problem and what was your fix?
Thanks
Dan

Re: ATF: Sundance - Dump Pull Handels

I haven't heard about this being a recurring problem. I can see no reason that using a Blue Threadlock would damage anything. Being a long time motorcycle rider, I tend to use Locktite on everything!

Re: ATF: Sundance - Dump Pull Handels

There should be a jam nut that goes on before you thread on the handle. Tighten it to the handle and it should stay put, but a little thread-lok should help it.

Re: ATF: Sundance - Dump Pull Handles

I spoke to the plant and they said that the handles just screw on and that the lock tight would be the best thing to use.

Thanks,