Results 1 to 8 of 8

Thread: Plastic piece that holds curtain

  1. Print this Post   #1
    Senior Member
    Join Date
    Nov 2011
    USA - MA

    Plastic piece that holds curtain

    Does anyone have a link on where to find the plastic L shaped piece that slides in the curtain and screws into the wall? It broke off, on the small curtain in the bedroom, on a 3670RL.

  2. Print this Post   #2
    Moderator cookie's Avatar
    Join Date
    May 2007
    USA - WI

    Re: Plastic piece that holds curtain

    I broke one on our last rig. They were ordered from Heartland. I bought 6 of em. Glad I did as I broke one in this rig last month. If I recall correctly they were about 2 bucks each.
    Heartland Customer Service

    Dave and Mary
    and C. J.
    2011 Bighorn 3585RL

    2013 RAM 3500, CC, DRW, Aisin
    Heartland Owners Club
    Member #1026

    Is club membership right for you? Click here to learn more

    Check out our Owner-written User Guides and Troubleshooting Guides

  3. Print this Post   #3
    Original Owners Club Member jmgratz's Avatar
    Join Date
    Sep 2007
    USA - TX

    Re: Plastic piece that holds curtain

    Have your vin handy when you call Heartland Customer Service. Be sure to mention you are a Heartland Owners Club member for a 10 percent discount.
    Jim & Sheila Gratz - owners club #1018 Workamping as Sales Associate with SE Publications Certified RV Walk-through Technician [/I] 2013 Landmark San Antonio - full body paint - Fulltimer pkg, Yetti pkg etc., Mor-Ryde IS with never lube bearings and disc brakes. --previous 5er - 2007 "Classic" Landmark "Golden Gate" Replaced 9/20/13 2012 Ford F350 King Ranch Crew Cab fx4 dually, 6.7 L Husky Trailer Saver TS2 hitch "visit TEXAS - it's like a whole 'nuther country" Rally Site 414

  4. Print this Post   #4
    Senior Member
    Join Date
    Sep 2009
    USA - AR

    Re: Plastic piece that holds curtain

    They are used in other RVs as well. We've purchased them at Camping World (when they have them) and at RV dealers' parts dept.
    Doug and Judy Chaney
    Heartland Owners Club #1444
    2013 Landmark Mesa
    2012 F-450 Lariat Diesel Dually

    Heartland Rallies:
    2009 Jackson, CA (visiting); Buellton, CA
    2011 Donna, TX Meet and Greet; Spring, TX; Goshen, IN National; Hershey, PA Club booth; Charleston, SC
    2012 Gillette, WY National; Cody, WY
    2013 Goshen, IN National

    States visited while RVing

  5. Print this Post   #5
    Senior Member
    Join Date
    Apr 2010
    CAN - AB

    Re: Plastic piece that holds curtain

    I had the problem with my previous Cardinal & my current BH. I got heavy duty ones from an Arctic Fox dealer. Have not had the problem since.

  6. Print this Post   #6
    Doug S
    Join Date
    Jan 2009
    USA - FL

    Re: Plastic piece that holds curtain

    I made new L shaped brackets out of stock aluminum that I bought at the hardware store. I copied the bends using a couple of pliers. I then cut the aluminum to length and drilled two holes where it is connected to the wall. This took only a couple of minutes. The fabrics covers the aluminum.

    2016 BigHorn 3160 EL - full body paint
    Prior RV: 2011 Landmark Grand Canyon - full body paint - Xantrex PROwatt SW 2,000 w inverter - 2-2,000 Honda Gen. - Winguard Carry Sat.
    2012 F350, 4X4, Diesel 6.7, TransferFlow 37 gallon for Pace Edwards cover.

  7. Print this Post   #7
    Past Washington Chapter Leaders SJH's Avatar
    Join Date
    Nov 2009
    USA - WA

    Re: Plastic piece that holds curtain Seems like I can no longer find the menu to create links so here is the address!
    Steve & AnaLyn
    2007.5 LMM Chevy Silverado D/A
    2010 Electra-Glide Classic Red Hot Sunglo

  8. Print this Post   #8
    Senior Member GOTTOYS's Avatar
    Join Date
    Aug 2010
    USA - MN

    Re: Plastic piece that holds curtain

    I repaired mine and they are much better than new. Start with a can of plastic pipe cement. You need the one that's good for both PVC and ABS. I got mine at Lowes for about 5 bucks. Just a little dab on each end, press them together and hold the for about 30 seconds. They'll stick on their own after that. When you put them together be sure you get them lined up so they go together right where they broke. After 3-4 hours, so they cure real good, reattach them with new screws. This is the key, Replace all those flathead countersink style screws with some 3/4 X #10 panhead sheetmetal screws. It's the screws they used that are causing them to break. You will notice they all break in the same place. The taper on the screws is forcing the bracket apart right where the screw goes through them causing them to crack. For extra safety I traded mine with one in a "safer" location to keep it from breaking at the repair, although I don't think it matters. Then proceed to replace all those old screws with the panheads. So far so good and.... I have enough glue to keep me entertained for months....Don
    Don & Kathy, Daisy Mae the rescue pup.
    She drives...He sits behind the steering wheel

    2011 BC 3250 TS
    2015 Chev D/A 3500 Dually

Similar Threads

  1. Need advice on adding a short piece of gutter
    By patrick1945 in forum Exterior Windows & Doors
    Replies: 3
    Last Post: 11-17-2011, 04:56 PM
  2. Replies: 2
    Last Post: 09-06-2011, 06:45 AM
  3. Beaver tail piece
    By captpfd in forum Cyclone - Garage
    Replies: 2
    Last Post: 12-09-2010, 04:16 PM
  4. What holds the roof on? Missing post
    By flameon in forum Steps, Ladders, Roof, Finish, Decals & End Caps
    Replies: 4
    Last Post: 10-06-2010, 01:20 PM
  5. Broken Plastic piece from Curtain in bedroom
    By drjbb in forum Window Treatments
    Replies: 7
    Last Post: 07-16-2009, 08:27 AM



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts