Graco fuel pump cover seal

Hello, greetings from Freddy Beach, NB and thanks for the forum. This is my first post, we have a 34' Cyclone toy hauler 2008
Does anyone know where to obtain the o-ring for the pump cover on a Graco fuel pump model 260009?
the o-ring comes only in a kit from Graco which includes the entire pump housing assembly!
I got the pump running, it had a pinched o-ring in the pump cover which was jamming the gears...
Thank you,
Mark

I don't know how the auto parts stores in your area are, but here in the states you might be able to take your O-ring in and match it up for probably under a dollar. A good hardware store might also have something to use.
Do you have a NAPA store near you?
Check out those two sources if available in your area.

Peace
Dave

cookie said:

I don't know how the auto parts stores in your area are, but here in the states you might be able to take your O-ring in and match it up for probably under a dollar. A good hardware store might also have something to use.
Do you have a NAPA store near you?
Check out those two sources if available in your area.

Peace
Dave

Click to expand...

Thanks Dave, Ill check at NAPA
Mark

You will however, need to make sure it is rated for gasoline...not all O'rings are.

ah ha, the o-ring expanded and didn't want to fit back in the groove...that could be why
Thanks Bob