For20hunter
Pacific Region Directors-Retired
Here is what Goodyear says for the G114's. It's all dependent on the load to the tire. 
Project LM 365
- Thread starter Jesstruckn/Jesstalkn
- Start date
-
- Tags
- locks
2psnapod2
Texas-South Chapter Leaders-Retired
It actually depends on your trailer weight. Google the tire inflation chart. That will give you the proper inflation data youneed.
https://www.goodyearrvtires.com/tire-inflation-loading.aspx
Sent from my SM-G975U using Tapatalk
https://www.goodyearrvtires.com/tire-inflation-loading.aspx
Sent from my SM-G975U using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Quick and easy.
Dish Network LNB harness replacement.
Had to change out the LNB cable harness today. TV went out on our last trip and after some trouble shooting I determined is was on the roof. After visually inspecting the old calbe I found it to be all roughen at the turret. I ordered a new harness from Winegard and replaced it today. Everything works perfectly again.
I think the harness was $50 with shipping.
Sent from my SM-N950U using Tapatalk
Dish Network LNB harness replacement.
Had to change out the LNB cable harness today. TV went out on our last trip and after some trouble shooting I determined is was on the roof. After visually inspecting the old calbe I found it to be all roughen at the turret. I ordered a new harness from Winegard and replaced it today. Everything works perfectly again.
I think the harness was $50 with shipping.
Sent from my SM-N950U using Tapatalk
Last edited:
Jesstruckn/Jesstalkn
Well-known member
Wanted to post this on here. For all My Ford truck friends
I just found this device to unlock the ford camera system, so you can view any camera any time moving or not, and it remembers last setting. It also gives you turn signal cameras. I will be putting it on the new truck.
Ford forum link = https://www.ford-trucks.com/forums/1...in-motion.html
option #1 = https://redirect.viglink.com/?format...2Fcod-f50.html
option #2 = https://redirect.viglink.com/?format...2Fcod-f53.html
I just found this device to unlock the ford camera system, so you can view any camera any time moving or not, and it remembers last setting. It also gives you turn signal cameras. I will be putting it on the new truck.
Ford forum link = https://www.ford-trucks.com/forums/1...in-motion.html
option #1 = https://redirect.viglink.com/?format...2Fcod-f50.html
option #2 = https://redirect.viglink.com/?format...2Fcod-f53.html
jleavitt11
retired Utah Chapter Leaders
This looks awesome. Did you try it on your 2017?
Jesstruckn/Jesstalkn
Well-known member
No just found out about it yesterday.
I will wait and try it on the 2020
Sent from my SM-N950U using Tapatalk
jleavitt11
retired Utah Chapter Leaders
Jesstruckn/Jesstalkn
Well-known member
Get the 53 then you can add the extra camera's.
I really like the thermal imaging camera. That is really cool.
Look for the videos if you haven't found them already.
Sent from my SM-N950U using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Jim did you watch the FLIR night vision camera video ?
https://www.youtube.com/watch?v=oUiN2g4DIo8#action=share
https://www.youtube.com/watch?v=oUiN2g4DIo8#action=share
Jesstruckn/Jesstalkn
Well-known member
Ford finaly released the numbers on the 2020 Ford.
475 horsepower and 1050 lb-ft of torque
https://news.yahoo.com/2020-ford-super-duty-takes-164500251.html?.tsrc=daily_mail&uh_test=1_04
475 horsepower and 1050 lb-ft of torque
https://news.yahoo.com/2020-ford-super-duty-takes-164500251.html?.tsrc=daily_mail&uh_test=1_04
Ford finaly released the numbers on the 2020 Ford.
475 horsepower and 1050 lb-ft of torque
https://news.yahoo.com/2020-ford-super-duty-takes-164500251.html?.tsrc=daily_mail&uh_test=1_04
After all the work you have done to your truck are even considering replacing it?
Last edited by a moderator:
Jesstruckn/Jesstalkn
Well-known member
Absolutely. New truck on order and will be here in December.
Somebody is going to get a awesome 2017 F350 all set up and ready to roll.
Sent from my SM-N950U using Tapatalk
Bones
Well-known member
Ford finaly released the numbers on the 2020 Ford.
475 horsepower and 1050 lb-ft of torque
https://news.yahoo.com/2020-ford-super-duty-takes-164500251.html?.tsrc=daily_mail&uh_test=1_04
These are definitely great numbers. I'm good with the 2019 numbers. Let us know how the suspension works out.
Last edited by a moderator:
Jesstruckn/Jesstalkn
Well-known member
Absolutely !!
Sent from my SM-N950U using Tapatalk
Sent from my SM-N950U using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
WIFI Ranger Elite
Update 10/4/19: This thing was junk !!! Some of this my have been me not understanding how to operate it from the laptop. I called customer service a few times and they basically brushed me off and said it was a windows problem with my laptop and I needed to take it up with Windows. Emails back and forth until I got fed up. I never was able to use it in the two months I had it. So I finally got them to take it back and refund my money. Of course I had to patch the holes in my roof. Lesson learned Do your research before you buy it not after !!!
https://heartlandowners.org/showthread.php/54076-Project-LM-365?p=624500&viewfull=1#post624500
Update 10/4/19: This thing was junk !!! Some of this my have been me not understanding how to operate it from the laptop. I called customer service a few times and they basically brushed me off and said it was a windows problem with my laptop and I needed to take it up with Windows. Emails back and forth until I got fed up. I never was able to use it in the two months I had it. So I finally got them to take it back and refund my money. Of course I had to patch the holes in my roof. Lesson learned
Do your research before you buy it not after !!!https://heartlandowners.org/showthread.php/54076-Project-LM-365?p=624500&viewfull=1#post624500
Jesstruckn/Jesstalkn
Well-known member
Jim B. Had issues with his too.
Sent from my SM-N950U using Tapatalk
Sent from my SM-N950U using Tapatalk
kbausano
Well-known member
We’ve struggled with ours, especially when moving from place to place. (We are on Apple iOS, btw)
Sent from my iPhone using Tapatalk
