Project LM 365

Jesstruckn/Jesstalkn

Well-known member
Thanks I should have it out of paint shop today and back to the dealer for the last of the warranty work "I HOPE" do the Cilajet Wax job on Friday and back into our hands Friday night. So I will post more of the completed pics this weekend.
 

Jesstruckn/Jesstalkn

Well-known member
Here are some of the odd flaws that were on the left side of the slide wall and main wall of my 365 from the factory. My dealer sent Heartland some pictures of it one day when they had it in there for warranty work. When I went to pick it up they told me that Heartland wanted to fix it ASAP. We are not sure what made the hexagon marks but they found 4 of them and a few big circles all on the same side. Anyone have any idea's of what there from ? and if I could figure out how Jim makes the red circles on his pictures I could help you find them in my pics.


Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1439444363447.jpg
    uploadfromtaptalk1439444363447.jpg
    30.6 KB · Views: 1,189
  • uploadfromtaptalk1439444447490.jpg
    uploadfromtaptalk1439444447490.jpg
    28.2 KB · Views: 1,152
  • uploadfromtaptalk1439444533908.jpg
    uploadfromtaptalk1439444533908.jpg
    39.3 KB · Views: 1,160
  • uploadfromtaptalk1439444670532.jpg
    uploadfromtaptalk1439444670532.jpg
    24.8 KB · Views: 1,148
  • uploadfromtaptalk1439444772170.jpg
    uploadfromtaptalk1439444772170.jpg
    58 KB · Views: 1,154
  • uploadfromtaptalk1439444841342.jpg
    uploadfromtaptalk1439444841342.jpg
    64.7 KB · Views: 1,111

Bones

Well-known member
Here are some of the odd flaws that were on the left side of the slide wall and main wall of my 365 from the factory. My dealer sent Heartland some pictures of it one day when they had it in there for warranty work. When I went to pick it up they told me that Heartland wanted to fix it ASAP. We are not sure what made the hexagon marks but they found 4 of them and a few big circles all on the same side. Anyone have any idea's of what there from ? and if I could figure out how Jim makes the red circles on his pictures I could help you find them in my pics.


Sent from my XT1254 using Tapatalk
That almost looks like someone left tape on the side wall by accident then removed it afterwards leaving the raised sections
 

danemayer

Well-known member
We are not sure what made the hexagon marks but they found 4 of them and a few big circles all on the same side. Anyone have any idea's of what there from ?

Wild guess: hex marks left by the clamps used to move the walls around. Of course that raises the question of why they would leave marks.
 

Jesstruckn/Jesstalkn

Well-known member
Ya and why they aren't on everyone's walls ? He said after sanding it down it looked like they had cut out the holes for some reason and put plug pieces in them. and then forgot to sand them down before it went to paint.

Sent from my XT1254 using Tapatalk
 
Last edited:

Jesstruckn/Jesstalkn

Well-known member
I have a few more pics of the slides after we pulled off the tape.. Heading back to Manteca Trailer for some warranty repairs and a bath and we will be on the coast next week to take some good pics...
uploadfromtaptalk1439511198701.jpguploadfromtaptalk1439511863351.jpguploadfromtaptalk1439511992685.jpguploadfromtaptalk1439512121704.jpg

Sent from my XT1254 using Tapatalk
 
Last edited:

Jesstruckn/Jesstalkn

Well-known member
We got the rig back today, so excited to get it loaded up and headed out. I took a few more pick of the painted slide outs
uploadfromtaptalk1439625334274.jpguploadfromtaptalk1439625402335.jpguploadfromtaptalk1439625470008.jpguploadfromtaptalk1439625545632.jpguploadfromtaptalk1439625648769.jpg

Sent from my XT1254 using Tapatalk
 

jmgratz

Original Owners Club Member
That looks great. Gives it a much 'richer' look. Much like the higher end Motor Homes. Would like to see that as a standard feature on the Landmark 365 full body paint and only on the Landmark which would designate it as a high end coach. Are you listening Tom?
 

Jesstruckn/Jesstalkn

Well-known member
Thanks ... I agree they should, and it would have been alot easier and cheaper to do it all at once at the factory. I ask the shop to give me a quote. He looked at it and said $1500 to $2000... I said ok. This was there first time doing stripes on the slide outs so I think it ended up being a bit more work then he estimated. They do a ton of RV repairs and paint work for Manteca Trailer so it put my trust in them. Turned out pretty good.

Sent from my XT1254 using Tapatalk
 

jayc

Texas-South Chapter Leaders
Very nice! I love the painted slides and have thought for long time that full body paint should be fully painted! I understand that it costs extra but at least make it an option. If we want our unit "finished out" and can afford the extra cost, let us do it. It is easier and probably cheaper to have it done at the paint shop.
 

Jesstruckn/Jesstalkn

Well-known member
Very nice! I love the painted slides and have thought for long time that full body paint should be fully painted! I understand that it costs extra but at least make it an option. If we want our unit "finished out" and can afford the extra cost, let us do it. It is easier and probably cheaper to have it done at the paint shop.
Yes ... That would be an option I would pay for. Make it a forced option LOL.
"Some of you will get that"

Sent from my XT1254 using Tapatalk
 

Jesstruckn/Jesstalkn

Well-known member
Installed the new and improved Trail-air pin box. I had my tarp shop make a custom cover for it to protect it from the sun when its parked. My last one had a lot of cracks in the air bag after about 6 or 7 years.

Sent from my XT1254 using Tapatalk[/IMG][/IMG]
d21082699bef52c6301b7eca78f20711.jpg

7b16ca02597e63e098352ac14416b35d.jpg
 

Attachments

  • uploadfromtaptalk1439655712529.jpg
    uploadfromtaptalk1439655712529.jpg
    103.9 KB · Views: 404
  • uploadfromtaptalk1439655791978.jpg
    uploadfromtaptalk1439655791978.jpg
    87.9 KB · Views: 400
Last edited:

Jesstruckn/Jesstalkn

Well-known member
Quick and easy Mod.
I installed a sliding window lock on my tri-slide shower door to hold the first door in place. So now you only have to pull the 1 door closed when you get into the shower.
uploadfromtaptalk1439670747303.jpguploadfromtaptalk1439670764870.jpg

Sent from my XT1254 using Tapatalk
 
Top