Flat Screen TV mount

jlivet

Member
Made my TV entertainment center and bedroom TV cabinet on my 3300sk so I could leave flat creen TVs in place in travel. I used 3/4"x 2 1/2" oak finished same as cabinet and cut the same deepth as cabinet and attached to the sides half way down on each side. I cut one 5/8" notch half way in each board and two 5/8" holes in each that would accept a 5/8" dowel rod that I then slid a piece of the pipe insulation over both dowel rods. The rear dowel is in the round holes are at the rear of TV and is stationary and the 5/8 slots are to the front of TV so when ready to travel all you have to do is drop the front padded dowel across the front of TV and it is locked in place. Even added a slide latch across the top of the 5/8" slot just for extra security so it could not jump out of the slot. Works great and TVs are allways in place and secure.
 
Top