Results 1 to 2 of 2

Thread: M22 Floor sagging between slide and kitchen

  1. Print this Post   #1
    Junior Member
    Join Date
    Apr 2014
    Location
    USA - AZ
    Posts
    1

    M22 Floor sagging between slide and kitchen

    Hi, wondering if anyone has had their floor sag, then crack in their M22 (or other Edge model). Big soft spot between slide and kitchen area, directly in line with rear table mount. Any advice on fixing this would be appreciated. Thank you.

  2. Print this Post   #2
    Member
    Join Date
    Oct 2009
    Location
    CAN - AB
    Posts
    20

    Re: M22 Floor sagging between slide and kitchen

    Quote Originally Posted by BetterRide View Post
    Hi, wondering if anyone has had their floor sag, then crack in their M22 (or other Edge model). Big soft spot between slide and kitchen area, directly in line with rear table mount. Any advice on fixing this would be appreciated. Thank you.
    This problem is either structural or water damage The first thing I would do is rule out water leaks. Most often the majority of floor damage actually happens from water intrusion from the outside of the trailer. This can be windows, roof vents, water heater, water fill door and any other item that creates a hole from outside. Look carefully around the wheel wells. You may want to have the trailer pressure tested for leaks as they are very hard to find. If you have determined that is is not a water leak or have found the leak and corrected it, you could lay down a layer of plywood to strengthen the floor. You could then cover the plywood with a floor covering of your choice. This job maybe a little challenging as there is a lot of cutting.

Similar Threads

  1. 2007 3500RL left slide out eats up linoleeum kitchen floor
    By JAR in forum Slide Rooms, Slide Toppers & Awnings
    Replies: 2
    Last Post: 10-15-2012, 03:01 PM
  2. Kitchen slide damaging floor
    By kbailey in forum Landmark - General Discussions
    Replies: 4
    Last Post: 10-07-2012, 07:00 PM
  3. insdie floor sagging
    By kyleigh01 in forum Frame / Landing, Leveling & Stabilizing Gear
    Replies: 4
    Last Post: 12-12-2010, 10:48 PM
  4. 27BHS Floor Sagging
    By mikecarlson1 in forum North Country - Ask The Factory
    Replies: 1
    Last Post: 07-04-2010, 11:24 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •