Second Circuit Breaker?

Can anyone tell me why this would be this way? It is on a 2014 415 Road Warrior. He is having an issue with the Hydraulics kicking out. This is 2 30 Amp Self Resetting

.

LOL that is the second one I've seen like that.
The first one I think it was a Camping world Repair job trying to fix the guys issue..
Needless to say that didn't work.
You could add another link across the bottom from empty turmanal to the wire going to the pump. That would give you 2 50 amp side by side but once you pop the first 50 amp breaker the second will follow shortly.
If it were me I'd just put the 80 amp in there.
It has completely solved my issue.



Sent from my XT1585 using Tapatalk

Jerod this is the main breaker coming from the battery. Not the pump. It was 2 30 amps and he replaced it with 1 50 amp. Still does not work. Would you put an 80 as the main circuit breaker

That is really backwards if that's the case.

If it were me I would run the 1 50 in the line from the batteries to the cut off switch then from the cut off switch to the row of breakers.
I would then run a main positive cable from the batteries to a 80amp breaker going straight to the hydraulic pump solinoid.

Hope my scribbles help
Jerrod

Sent from my XT1585 using Tapatalk

Thanks Jerod for your help. I will get this info to him. And help too! LOL

- - - Updated - - -

Jerod what size wire is needed for the 80 amp CB?

I was hoping you wouldn't ask that.
I'd use like a 4gauge wire. Like you would get from an auto parts store for your car.
I make my own but they have them pre made in different lengths

Sent from my XT1585 using Tapatalk

He had a hydraulic crimper and can make his own also. So not a big deal.

Sent from my SM-G930V using Tapatalk