Rear bunk bed.

VTA_slug · Aug 23, 2017

In the 2017 cyclone 3600, Can the rear bunk bed stay up at the top while the bottom section of the seats get moved down? They are on the same chain drive system and it doesn't look like there is a lock or unhook.
Thanks

Sent from my SM-G935V using Tapatalk

Lynn1130 · Aug 23, 2017

You should have 4 pins that have rings on the end and are about 3.5 inches long. They go in the holes in the rail below the top bunk to hold the top bunk in place when you wish to lower only the bottom bunk.

My top bunk is out right now as I just completed a modification but this is how it works.

VTA_slug · Aug 23, 2017

Lynn1130 said:
You should have 4 pins that have rings on the end and are about 3.5 inches long. They go in the holes in the rail below the top bunk to hold the top bunk in place when you wish to lower only the bottom bunk.

My top bunk is out right now as I just completed a modification but this is how it works.

Oh ok, thank you very much. Those pins were in a drawer and I had no clue what they were used for. Thanks again

Sent from my SM-G935V using Tapatalk

Rear bunk bed.

VTA_slug

Member

Lynn1130

Well-known member

Attachments

VTA_slug

Member

Similar threads