How to mount a TV in a Prowler Lynx

Does anyone have any suggestions on how to mount a 32" TV to the console in the Prowler Lynx 285. I bought a wall mount bracket, just now sure how solid this console wall is. I do not think the screws and other hardware that came with the wall mount will work. Looking for ideas, suggestions, what others have done.

1st time RV owner. Trying not to mess up the wall with trial and error.

Thanks in advance,
David

If you go in to the Heartland Pioneer community I posted what I did to add extra support for our television. Just a note that I didn't put in my post is that I was able to feel vertical support on the back side of the wall (bedroom area) which was center of where I mounted the television.

I haven't mounted the TV in ours after 3 years. We store it on the bed and set it up when we get to our camping spot. Of course I destroyed one TV this way too. The wall behind the entertainment unit needs reinforcing to carry the weight of a mounted TV.

Ok thanks for that info.

This is how i mounted a TV in our previous trailer
found a board with nice grain
stained and varnished to look almost factory
attached it to the bedroom wall with six screws
then mounted the TV to it
sorry its sideways......cant figure out how to rotate lol