Level up problem

Sharpie

Member
Have a new 3160EL, the 6 point level has been working fine until I dropped it off at storage. The two jacks on the door side now go down with the landing gear. Nothing I’ve done has done any good. Suggestions?

Thanks.
 

lynndiwagoner

Well-known member
Look on the hydraulic manifold and make sure all of the valves are screwed closed. Look around on the HOM and you'll find the valve adjustments.
 

danemayer

Well-known member
The control valve to those jacks sounds like it's either mechanically stuck open or energized.
 

Attachments

  • Lippert Level-Up Block Diagram.jpg
    Lippert Level-Up Block Diagram.jpg
    68.7 KB · Views: 50

Sharpie

Member
Problem solved, don’t know. The batteries weren’t down much but I did charge them. Door side jacks still went down with the landing gear. I then did a retract all which seems to have fixed problem. The biggest problem may have been my ignorance of this new to me system.
Thanks again for the pointers, I’ll keep them handy.
 
Top