Results 1 to 3 of 3

Thread: Replace NT26 LRSS Rear Chairs?

  1. Print this Post   #1
    Junior Member
    Join Date
    Apr 2016
    Location
    USA - WI
    Posts
    1

    Replace NT26 LRSS Rear Chairs?

    Has anyone replaced the two swivel chairs by the back door in their 26LRSS? There doesn't seem to be enough room for them and I've found that the backs of the chairs rub on the windows, damaging the vinyl. Thanks.

  2. Print this Post   #2
    Senior Member Domi's Avatar
    Join Date
    Sep 2015
    Location
    USA - CO
    Posts
    209

    Re: Replace NT26 LRSS Rear Chairs?

    Hi and Welcome to the Forums.

    In our NT we have replaced one of the chairs with a lazy boy. When I did that since I did not want it against the back wall I placed a piece of plywood behind shaped like an L so that part was on the wall and part on the floor. I took an old piece of carpet and covered the wall side so the L piece would not damage the wall. This keeps the chair from hitting the wall and sliding back but also protects the wall.

    You could do something similar with the current chairs to keep them from rubbing the wall.

    Good luck with your North Trail.

    John
    Domi and John

    Truck
    - 2004 GMC 2500 HD Crew Cab with Titan Fuel tank, Bed Slide
    Trailer - 2011 North Trail 28RLS (Second Owner) with New Running Gear, Electric Hitch, LED Light Bulbs, Yada Wireless Backup Camera (Modified), 3 Step Glow Step Revolution


  3. Print this Post   #3
    Member
    Join Date
    Nov 2014
    Location
    USA - CA
    Posts
    91

    Re: Replace NT26 LRSS Rear Chairs?

    We have a 26LRSS and ordered it new with (non-swivel) recliners instead of the standard swivel barrel chairs for the rear. It was required to adjust the recliner positions a little bit for use and for rear reclining clearance.
    The recliners did not fit when the slide-out is retracted for travel so we turned the chair near the slide-out 90 degrees.
    We also ordered the separate dining table and 4 chairs instead of the built-in dinette. With this set-up all the furniture (recliners, tri-fold sofa & dining table/chairs) can be moved to any location within the living area.

    Since only my wife and I usually travel we have removed the sofa completely. If we have someone else stay with us we use a blow-up mattress in the living area for extra sleeping. We have moved the dinette & 2 original chairs (bought 2 additional foldup chairs) to the rear area next to the back window. This leaves the entire slide-out area for the recliners. We also recently purchased new residential swivel recliners/ottomans so they become more versatile in the living area since the original recliners are non-swivel and were minimally comfortable anyways.

    So yes, different recliners can work in the rear area but will need to be adjusted for travel. You may wish to try the swivel recliners with the built-in leg lifts though. I relocated the furniture tie-downs for their new locations.

    Fred

Similar Threads

  1. LRSS 26 Deep Pantry w/Removable Shelves
    By silvasp in forum North Trail - General Discussions
    Replies: 0
    Last Post: 11-01-2016, 07:26 PM
  2. Need to replace rear stabilizers on North Trail 28dbs
    By Willcn in forum Frame / Landing, Leveling & Stabilizing Gear
    Replies: 6
    Last Post: 09-30-2016, 09:50 AM
  3. Add a roof vent to the bedroom NT KING 26 LRSS
    By silvasp in forum North Trail - Modifications
    Replies: 6
    Last Post: 08-15-2016, 11:23 AM
  4. 26 LRSS Ownere: Question about shower
    By KingNothing in forum North Trail - General Discussions
    Replies: 7
    Last Post: 07-07-2016, 05:20 PM
  5. Slides for rear chairs
    By MTPockets in forum Furniture
    Replies: 10
    Last Post: 09-09-2012, 01:18 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •