Cmiddleton
Member
I'm having issues with hooking up the Furrion Pre-wired camera? Its supposed to be a "Plug and Play System". I have plugged, but no play...... Cigarette power cord for monitor came with a connector to test the camera. When I plug camera into that everything works great. However when I plug it into the back mount on the trailer I get nothing. Camera will not pair with the monitor. Trailer 7-way is plugged into my truck and truck is running. I have tried everything. Put truck in reverse, turned lights to every setting possible and each time the monitor will not pair with the camera. I have a 2019 Fuel 335, which is 40'-7" long and I pull it with a 2017 F350.
1. Is it possible the Pre-Wire wasn't connected correctly. Is there a wiring diagram that I could check to make sure camera is getting power?
2. Is the distance too long for the camera to pair?? I'm most worried about this possibility......
3. Is the aluminum body of the new fords causing problems? (Note that I did held the monitor out of the window several times, but still would not pair. Don't think this is the issue.)
Please let me know if you have any suggestions.
Chris Middleton
1. Is it possible the Pre-Wire wasn't connected correctly. Is there a wiring diagram that I could check to make sure camera is getting power?
2. Is the distance too long for the camera to pair?? I'm most worried about this possibility......
3. Is the aluminum body of the new fords causing problems? (Note that I did held the monitor out of the window several times, but still would not pair. Don't think this is the issue.)
Please let me know if you have any suggestions.
Chris Middleton