I have a 2012 Cyclone 3950 with one large awning. The awning has stopped working and is in the retracted position. The fuse panel is fine. Where do I start looking so I can fix the awning?
First stop would be the switch. Use a voltmeter to see if you have 12v DC at the switch (on the side leading to the awning. Next stop for me would be the motor on the slide.
Like said check your switch. But also keep in mind just looking at the fuse may not show it bad. Use a meter and read the fuse to make sure the fuse is good.
Like said check your switch. But also keep in mind just looking at the fuse may not show it bad. Use a meter and read the fuse to make sure the fuse is good.
First stop would be the switch. Use a voltmeter to see if you have 12v DC at the switch (on the side leading to the awning. Next stop for me would be the motor on the slide.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.