Cyclone outside spray port

emery395

Well-known member
Very difficult for me to put in and take out the quick connect to the spray port. Would like to put an extension so that it’s easier to manipulate. If someone has found something that fits could you please post a link or if you have a tip on making it easier to put in and take out that connector

I have tried shutting off water to the unit and then draining so there was no pressure and it still too difficult to work
 

Lynn1130

Well-known member
You may already be doing this but there is a slip ring around the connection in the UDC that must be pushed back with one hand while you put the hose connection in with the other hand.
 

danemayer

Well-known member
Take the coiled hose to a hardware store to see if you can find a matching fitting. If they have both male and female, you can buy a little hose and make an extension. Then you can let us all know what fittings they are.
 
I also had a hard time detaching and connecting that hose, until I found the ring that needs to be pulled while connecting/disconnecting. Like Lynn stated above. Super easy now

Sent from my SM-N960U using Tapatalk
 
Top