Results 1 to 4 of 4

Thread: Gearbox replacement

  1. Print this Post   #1

    Gearbox replacement

    Hi everybody,

    Have a Cyclone fifth wheel toy hauler, 3110. The bedroom slide is not working. Found out that the shaft and gearbox are no longer working. The gearbox part # is R25062. Does anyone know if gearbox part # 250761 replaces R25062. The original part is on back order and a local RV parts dealer states that he believes the 250761, which he stocks, replaces R25062. I have checked the internet and can't find anything to verify this. Anyone here may know or know of where to look?

    Thanks for the help.

    Johnny

  2. Print this Post   #2
    Senior Member wdk450's Avatar
    Join Date
    May 2008
    Location
    USA - CA
    Posts
    5,399

    Re: Gearbox replacement

    Johnny:
    The slides are most likely made by Lippert. Call them (phone number is on the left side of the forum portal page) and ask for tech support help. You need to have your VIN number at the ready.

    There is a Lippert online parts catalog here: https://store.lci1.com/home

    There are slideout manuals under the "Tools" tab at the top of each forum page, then "Manuals" and other sub-menus to what you want.
    Bill Knight KJ6TBE
    Retired 40 Year Hospital Biomedical Electronics Technician
    Former State Chairman (2000) California Medical Instrumentation Association (CMIA)
    2008 Bighorn 3670RL
    My Bighorn Upgrades
    See:
    https://docs.google.com/document/d/1...it?usp=sharing


    2004 Dodge RAM 3500 Cummins 5.9
    B-D Exhaust Brake
    Ride Rite Air Bags
    Valvoline 15-40 High Mileage Diesel Oil
    XDP Diesel Power Plus Fuel Additive

    At a Thousand Trails in Southern California

    21 Heartland Rallies I Have Attended
    See: https://docs.google.com/document/d/1_PRxlhCp1l7IXgiVIBJmCtX3viJ9NaykR8_b81W9CVU/edit?usp=sharing

    Thousand Trails Elite Membership

    Support this Forum! Join the Heartland Owners Club at the "Owners Club" Tab at the top of this Page!!!
    Remember The USS Liberty . . . Read: http://www.lewrockwell.com/orig/margolis12.html
    "The truth sounds like hate to those who hate the truth"

  3. Print this Post   #3
    Senior Member
    Join Date
    Jul 2010
    Location
    USA - CO
    Posts
    801

    Re: Gearbox replacement

    Not interchangeable. The 25076 uses a .19 in. shaft. The 25062 uses a .12 in. shaft.
    Attached Files Attached Files
    Ted
    Member #1700 expired

    2011 Ford Lariat 6.7PowerStroke CC LB 4x4

  4. Print this Post   #4

    Re: Gearbox/motor replacement for cable slide out

    Thanks everyone for the information. I reached out to Norco Industries in Elkhart, Indiana. They confirmed that the R25076 gearbox is not compatible with the motor I have R25060 because of the drive shaft size difference, as TedS confirmed also. In fact the tech stated that they no longer make the current model motor and gear box kit that I have, kit # 225003. There are after market ones being made though, but as I have found out are on back order until further notice. The techs recommendation was to upgrade to kit # 225007 or 225008, both which have bigger drive shafts and includes the upgraded motor, drive shaft and gearbox. The difference between these kits is the motor. The 225008 are for use on the bigger/heavier slide outs. These kits are the newest ones being manufactured. The tech stated that the upgraded kit replaces the older 225003 and 225004 kits. I am going to replace the entire assembly; motor, gearbox and drive shaft with the updated kit.

    Again, thanks for the help.

    Johnny

    - - - Updated - - -

    Quote Originally Posted by TedS View Post
    Not interchangeable. The 25076 uses a .19 in. shaft. The 25062 uses a .12 in. shaft.

    Thanks TedS for the update. I printed out the information.

    - - - Updated - - -

    Quote Originally Posted by wdk450 View Post
    Johnny:
    The slides are most likely made by Lippert. Call them (phone number is on the left side of the forum portal page) and ask for tech support help. You need to have your VIN number at the ready.

    There is a Lippert online parts catalog here: https://store.lci1.com/home

    There are slideout manuals under the "Tools" tab at the top of each forum page, then "Manuals" and other sub-menus to what you want.
    Thanks Tony.

    - - - Updated - - -

    Quote Originally Posted by wdk450 View Post
    Johnny:
    The slides are most likely made by Lippert. Call them (phone number is on the left side of the forum portal page) and ask for tech support help. You need to have your VIN number at the ready.

    There is a Lippert online parts catalog here: https://store.lci1.com/home

    There are slideout manuals under the "Tools" tab at the top of each forum page, then "Manuals" and other sub-menus to what you want.

    Soory Bill, called you Tony.
    Last edited by Terry H; 07-17-2019 at 11:14 PM. Reason: Deleted Duplicate Text

Similar Threads

  1. New forum member with 2005 Fleetwood gearbox
    By Playtime348 in forum Welcome
    Replies: 2
    Last Post: 06-28-2018, 11:39 PM
  2. Damaged landing gearbox, anyone know how to fix it?
    By Kblock108 in forum Frame / Landing, Leveling & Stabilizing Gear
    Replies: 10
    Last Post: 07-24-2013, 11:30 AM
  3. Replies: 5
    Last Post: 05-28-2013, 04:25 PM
  4. Landing Gear gearbox failure
    By mmceldowney in forum Frame / Landing, Leveling & Stabilizing Gear
    Replies: 20
    Last Post: 11-21-2011, 12:15 AM
  5. Another landing gearbox fail
    By Chuck Richard in forum Heartland General Forum
    Replies: 22
    Last Post: 06-27-2008, 02:44 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •