Bedroom Television Hookup

We are trying to hook up a DISH wally to the bedroom television in our 2019 Phoenix. The back of the television is not accessible and we are trying to figure out how to hook the HDMI output to the area in the closet. There is not an HDMI port on the wall. Any advice would be appreciated!
 

danemayer

Well-known member
Sometimes the TV mounting bracket is released by loosening 1 or 2 screws from underneath. A mirror will help. If you don't have an HDMI connection on a wall plate, you may have to run one from the closet to the TV.

Here's a side view.

TV Mount Crimson_F46_TV_Mounting screw.jpg
 

Flick

Well-known member
We are trying to hook up a DISH wally to the bedroom television in our 2019 Phoenix. The back of the television is not accessible and we are trying to figure out how to hook the HDMI output to the area in the closet. There is not an HDMI port on the wall. Any advice would be appreciated!

Where is the Wally located?
 
The Wally will have to be in the bedroom closet where the antenna/cable boxes are located. It seems dumb to me that there is not an HDMI output on the wall outlet.
 

Warrstang331

North Carolina Chapter Leaders
We are trying to hook up a DISH wally to the bedroom television in our 2019 Phoenix. The back of the television is not accessible and we are trying to figure out how to hook the HDMI output to the area in the closet. There is not an HDMI port on the wall. Any advice would be appreciated!

To access behind the tv in the bedroom look at both ends at the bottom of the tv. You will see a small L Bracket on both ends that you can easily access with a long Phillips head screwdriver. Pull the tv forward at the bottom and lift off the rear bracket.

365924b6-95e4-4e71-bab2-9cb6ce4c729b
2dad5662-d5b0-4ac1-a706-65f5e20a7d35
 
Top