Battery not charging & slides will not operate

[Dave and Lee Tressell]

I have checked the inverter and the fuses are all ok. Slides and all 12 volt fixtures will not work. I have a new fully charged battery. Any suggestions on where to look next?

 

[PhotoPete]

Lets start with the basics, is the battery connected correctly and are the leads secured tightly?

 

[Dave and Lee Tressell]

Brain Fart!! When I put in the new battery I got the wires backwards. everything works now. I guess the old battery ( two + years old ) just gave out. Thanks Pete. Just a little bit ered faced.

 

[PhotoPete]

Glad to hear it was an easy fix. Have a good weekend

PhotoPete

 

[cookie]

Brain Fart!! When I put in the new battery I got the wires backwards. everything works now. I guess the old battery ( two + years old ) just gave out. Thanks Pete. Just a little bit ered faced.

If you hooked up the battery backwards, there is a 99.9% chance you blew the fuses on the converter. There should be three, thirty amp fuses on the converter. Check them.

Peace
Dave