Bedroom slide 2015 Cyclone 4200HD won’t slide out

[Brian and Cora]

One short press on the out switch and lights dim for a quarter second but no movement. Slid it in and out yesterday with no issue. If I press the in switch it sounds normal but since it is already in, it doesn’t move. My guess is a shorted wire on the out side somewhere. Any suggestions on where I should look?

 

[NYSUPstater]

Cable, electric or hyd slide? if electric, it's possible you have a weak/bad breaker. Is the battery fully charged?

 

[Brian and Cora]

Cable, electric or hyd slide? if electric, it's possible you have a weak/bad breaker. Is the battery fully charged?

On shore power electric and all new breakers. Same breaker to slide it in which thankfully worked ok. This morning I need to start tracing wires for a pinched or shorted wire

 

[Brian and Cora]

And I got it working. Went outside and kicked the right rear tire and…
Actually found another problem under the head of the bed with the wiring touching due to shoddy wiring cleanup after the replacement of the slide floor. I’ll be calling them this morning with some pictures. Thanks for contributing.