Removed by OP

danemayer

Well-known member
The 6 point Level-Up system is not supposed to tie into the hydraulic slide outs according to the aftermarket manual (last page) but they do. Apparently the slide out rams get their retract pressure from the L and R jacks! I replaced two hoses (orange and black) from the middle right side jack to the right rear jack. Tested them and the jacks worked great L and R. Tested slideouts they extended but would not retract. Apparently the slide out rams are the last devices on the daisy chained retract jack circuit, L and R.
I would not assume that an AFTERMARKET installation would be the same as a FACTORY installation.
 

sengli

Well-known member
I would have contacted lippert for any advise the hydraulics, they actually make the system, heartland just buys a package.
 
Top