Elkridge Control panel

[lcongdon64]

We have a question about our hot water controls. Our unit has 2 hot water switches. One looks like a light switch and is marked water heater. The other is on the panel with the holding tank sensors and lights up red when it's on. What are the differences between the 2 switches? I'm sure one is gas and one is electric but which is which? Thanks in advance!

 

[sengli]

On our rig the light switch is the AC. And the smaller rocker switch is the gas. You could easily figure it out, by flipping on the gas switch and listen to hear it spark and ignite. Obviously be carful that the water heater is full of water, before trying anything. Cause if you turn on the AC to the water heater w/o any water in it, it will blow your element.

 

[lcongdon64]

On our rig the light switch is the AC. And the smaller rocker switch is the gas. You could easily figure it out, by flipping on the gas switch and listen to hear it spark and ignite. Obviously be carful that the water heater is full of water, before trying anything. Cause if you turn on the AC to the water heater w/o any water in it, it will blow your element.

Thank you so much for the info.