Emergency window reinstallation

[Dick Gozinya]

I need help reinstalling my emergency window. It came off during cleaning, and I cannot get it back on. It's a 2015 bighorn.

 

[Dick Gozinya]

Waiting approval from who, for what ?

 

[david-steph2018]

What came off during cleaning, glass, window frame?

 

[Dick Gozinya]

The window with frame, all one piece. It is the emergency exit window and I opened it too far and it came right off. Now it doesn't want to go right back on. We bought the 5th wheel used, and I found 2 screws laying next to 2 holes that go to the window, but I can't get the window to line back up to reinstall the screws.

 

[david-steph2018]

Sorry, don't know which 2 screws you are talking about.
Are these screws inside or outside?

 

[wdk450]

May be worth your while to have a professional glass shop that does mobile repairs on RV's to come to you to do the repair.
An internet search may come up with some company locally.

 

[Routemaster]

We just had thunderstorms and had a bad water leakage firstly I see that the window does not shut off around the bottom side corner looking out.
I thought I would check out the seal flat foam. I thought it would have been rubber bulb shape? Any way like another post the window fell out. I could not get window back in, just found out that the window has to be almost vertical in the 1 to 2 o'clock region. Attempt again tomorrow really bad design By the way there are two Phillips screws in the frame going down into that C shape at the top of window I guess it a sort of stop.

 

[Routemaster]

Would you use 7/16" X 3/16" It looks like to me exiting seal is 3/8"x1/8" not finding anything like this out there, do you think the 3/16" would squash down for a better seal? I stuck in the window with tape until I make the decision in what order.
I have not found any info or seals on the Lippert site, why heck install a decent hinge.
What do reckon?
Den.

Awning Window Seals

www.steelerubber.com

 

[cookie]

Den, Steel Rubber will sent you samples of what ever you are trying to decide on.
Call them and ask for what you need. No charge.

Peace
Dave

 

[Routemaster]

Hi Dave thanks that's the plan this afternoon did send them a message earlier, no reply yet.
Den.

 

[Routemaster]

Dave. It is on its way, I went for the 7/16" x 3/16" for anyone else tackling this project at a cost of $82.14 inc shipping.
Den.

 

[Routemaster]

Today I took the window out from under the tape and installed the seal around the frame, and now and after finding on line the sheet
:- Lippert's WINDOWS QR-178 HEHR 6400 window it says there to install at 45 degrees but I have nurmous attempts no joy.
So disappointed in my 365 investment.

 

[Routemaster]

A mobile tech was in the park today and took him 15 minuets to reinstall the window.
Den.