Our 2009 BH3055 has been in storage for 4 months. Today while we were getting it ready for travel we tried to turn on the fridge but we keep getting an EO error. I read in the manual and it states that there is "no communication between display and power modules."
"The control system will revert to full automatic operation selecting the best energy source available with AC,GAS priority. The temperature setting will be maintained at the mid positions. The power module will continually attempt to reestablish operation of the display module."
#1 --- say what?
#2 --- should we leave it turned on and see if it reestablishes itself?
Propane is running and we also ran electric to it with no change.
DH is leaving in the morning and we won't be able to get this fixed if it needs to go in for repair. Since he needs the fridge we put block ice in it and let it work like a cooler. We had done this once before on our other trailer.
Any answers?
PS - I have never posted before and am not sure if I am in the right spot, any input would be appreciated.
"The control system will revert to full automatic operation selecting the best energy source available with AC,GAS priority. The temperature setting will be maintained at the mid positions. The power module will continually attempt to reestablish operation of the display module."
#1 --- say what?
#2 --- should we leave it turned on and see if it reestablishes itself?
Propane is running and we also ran electric to it with no change.
DH is leaving in the morning and we won't be able to get this fixed if it needs to go in for repair. Since he needs the fridge we put block ice in it and let it work like a cooler. We had done this once before on our other trailer.
Any answers?
PS - I have never posted before and am not sure if I am in the right spot, any input would be appreciated.