olcoon
Well-known member
I'm in the process of greasing the wet bolts & Equi-Flex, and have run across a problem. Out of the 20 zerks, I can't get grease in two of them. I've had this problem before (its on the off door side), and usually/sometimes after a while it'll take the grease. But today no matter what I do or try they are being stubborn.
I've got a pneumatic grease gun, and it's set at 90 psi. I even ran it up to 110 psi, and still no luck. Also when I first started lubing them, I had the tires off the ground. When they wouldn't take grease, I put the tires back on the ground & still no luck. Also, I've removed the zerks, and grease WILL go through them, so that's not the problem.
Anyone have any ideas? Already thought about buying a new rig, but DW almost shot me when I suggested it!!!
I've got a pneumatic grease gun, and it's set at 90 psi. I even ran it up to 110 psi, and still no luck. Also when I first started lubing them, I had the tires off the ground. When they wouldn't take grease, I put the tires back on the ground & still no luck. Also, I've removed the zerks, and grease WILL go through them, so that's not the problem.
Anyone have any ideas? Already thought about buying a new rig, but DW almost shot me when I suggested it!!!