SallyJo425
Member
Stovetop or oven will not light. We are on our first trip with our 2021 cyclone and after 2 hours we have no idea why the propane is not flowing to the camper.
Propane not working
- Thread starter SallyJo425
- Start date
SallyJo425
Member
Also….the led display on the oven isn’t on
Dahillbilly
Well-known member
make sure the tanks are not empty, close both tank valves, then very very slowly open them. then try to light stove top burners. Good luck
SallyJo425
Member
Thanks, thanks are full and we have tried that. I think we have electrical problem….furnace doesn’t work either
SallyJo425
Member
Technician just showed us how to start the oven and stove top, he never actually turned it on. Furnace was not turned on either during walk through.
david-steph2018
Well-known member
Which thermostat are you using for the furnace? Only one thermostat will control the furnace, and on our Road Warrior it is the one in the bedroom. Also just in case, when you get the furnace to work, the "fan" mode on the thermostat needs to be set to "auto" then cycle thru to you get to the furnace mode.
SallyJo425
Member
Good to know! Unfortunately I’ve tried the furnace in all 3 controls. I’ve got nothing.
wdk450
Well-known member
See this current thread : https://heartlandowners.org/threads/solved-furrion-oven-power.79567/#post-651917
Multiple people have now reported this electrical problem with the Furrion oven. I would start to suspect a quality control problem with the assembly line oven installer on this. When repairing this loose/disconnected 12 volt DC electrical power connector, I would try to gently modify (bend) the connector a bit so that it fits on the male spade connector more tightly.
Multiple people have now reported this electrical problem with the Furrion oven. I would start to suspect a quality control problem with the assembly line oven installer on this. When repairing this loose/disconnected 12 volt DC electrical power connector, I would try to gently modify (bend) the connector a bit so that it fits on the male spade connector more tightly.
david-steph2018
Well-known member
Okay, does the AC that controls the furnace work?
SallyJo425
Member
I saw that same thread. The cables was not loose behind the dc panel
SallyJo425
Member
Ac works fine on all 3 units
on my 2021 4006, i found that lines on regulator were back wards, so when rt tank was on, and selector on the regulator was to rt it was actually on to lt tank. does stove click when trying to light? battery switch on? fuses good? when you turn burner on can you hear gas?
buddy has Momentum with furrion range, regulator in range was hooked up back wards, would light but very small flame.
Similar threads
