Doug, I have a 2011 3670RL. I picked it up in Nov 2009. When we were loading for our last trip my wife Patti found the exact same gap in the front closet between the washer dryer closet and hanging closet. Because I also was having trouble getting the BR door to latch I suspected the worse (Frame flex) and hoped for the best... Turns out somebody at HL goofed, once again we proved they employ humans... Well, I met another 3670 owner and he too had the BR. door latch problem, it seems to be a common problem for what ever reason. The fix is to move the hole down. The bedroom closet... was the same scenario, the pieces just weren't fit correctly. If these pieces are being cut by or to a jig, the jig needs to be tweaked. Ditto for the striker plate on the BR door. Problem seems to be a breakdown in communication between the field and the factory. That's good, at least all indications are my frame is not bent. That could be a catastrophy... I'll bet you have the same thing. If you are still under warranty hit the dealer. If not, hit the dealer and see what they say. Hope for the best, expect the best. Last case scenario, pull the panel yourself, trim it and reinstall, it's just wood paneling, Good Luck. Tom