Latest activity
-
Dahillbilly replied to the thread Excessive electrical draw?.As Bogie said above check those grounds -
Bogie replied to the thread Excessive electrical draw?.Even though the battery is relatively new the first thing I would do is to have it tested to be sure. Next I make sure your converter... -
Bogie replied to the thread Having plenty of issues with my 2023 25jm.I’m thinking there is more than one thing going on here. Whatever bonding agent they used either failed or wasn’t applied at all...
-
RoadJunkie replied to the thread Excessive electrical draw?.Is this a new symptom, or the furnace motor has never caused these symptoms before? How is the health of your batteries and have you... -
LOL, true but I go alone to get away
-
Went under and this is what was buzzing. RV repair friend came over and checked it out. One of the wires that should be white is very... -
Ddavid-steph2018 replied to the thread Furnace buzz.Here is the model we have: https://www.rvupgradestore.com/Automatic-Power-Transfer-Relay-Switch-p/19-3148.htm The model you have...
-
travelin2 replied to the thread Furnace buzz.Are you sure it’s coming from the furnace? Others have indicated on other threads that the converter can be a source of such noise Lyle
-
pjones1969 reacted to Saleen05's post in the thread Loading and unloading UTV from 2021 Cyclone 4214 with
Like.
Thank you! All this helps! -
SSaleen05 replied to the thread Loading and unloading UTV from 2021 Cyclone 4214.Thank you! All this helps!
-
RRedrider007 replied to the thread Leaking jacks.CAT Hydraulic Oil Additive-1u9891 I believe the part number has been updated but they will advise of the replacement number. I bought it...
-
Ddavid-steph2018 replied to the thread Yeti Package switches? Water line heater switch?.On page 13 of this manual explains the Yeti Package...
-
Ttdcsparky replied to the thread water pump hookup to blue water lines.Found it. The fitting was cut off and replaced with a plane plug. Thanks for your help.
-
pjones1969 replied to the thread Loading and unloading UTV from 2021 Cyclone 4214.I use Macs Tire Bonnets on the rear tires only, I installed these D-Rings
-
SSaleen05 replied to the thread Loading and unloading UTV from 2021 Cyclone 4214.Do you tie your Turbo R down with wheel straps or go off the frame/axles, etc?
-
pjones1969 replied to the thread Loading and unloading UTV from 2021 Cyclone 4214.Cyclone 3800, Polaris Turbo R, I’m usually hooked up but have loaded and unloaded multiple times without being hooked up with no problems
-
SSaleen05 replied to the thread Loading and unloading UTV from 2021 Cyclone 4214.Thank you both very much for your input.
-
Dahillbilly replied to the thread Loading and unloading UTV from 2021 Cyclone 4214.that angle has caught up with me & the Harley twice turns into a pain!!!
-
Dahillbilly reacted to david-steph2018's post in the thread Loading and unloading UTV from 2021 Cyclone 4214 with Like.
We have a Can-am Spyder, our ground clearance is 4". The biggest issue for us is the angle of the ramp when loading/unloading. Sometimes...
-
Ddavid-steph2018 replied to the thread Loading and unloading UTV from 2021 Cyclone 4214.We have a Can-am Spyder, our ground clearance is 4". The biggest issue for us is the angle of the ramp when loading/unloading. Sometimes...
-
Dahillbilly replied to the thread Loading and unloading UTV from 2021 Cyclone 4214.haven't loaded a side by side but, my Harley with me on it goes around 1100 lbs & I've loaded & unloaded both ways without any issues
-
SGreetings, My wife and I recently "upgraded" from a 2020 Heartland BT 32GK to a 2021 Heartland Cyclone 4214 with the intent of doing...
-
Hhoefler replied to the thread water pump hookup to blue water lines.Look for a white braided flexible line, that is what it hooks to.
-
Ddavid-steph2018 replied to the thread water pump hookup to blue water lines.If possible, post a pic of the area.
-
Ddavid-steph2018 replied to the thread NORCOLD N10DC.This is an example of one of the breakers used: https://www.napaonline.com/en/p/BK_7823117 The 50-amp breaker is used for high draw...