mufflerman
Well-known member
I just picked up my cyclone from another 3 week stay at the dealer. They installed a hole for the manual crank for the landing gear, problem is they spoke to someone at the factory (I think Chris) and was told that the FACTORY ERRORED and put the propane door to far forward, Heartland asked my dealer for a suggested remedy and they suggested a PLASTIC cover that is used for a power supply. Now I have a THREE INCH hole in the wrong place because the door frame is in the wrong place, There is supposed to be about a 1 1/2" hole with a Steel bushing not a plastic cover that Heartland OK'ed.
So my question is how to fix this three inch hole and how to move the door opening rearward about 2".
Heartland should not have to ask the dealers how to remedy something and the dealer should not do a abnormal repair without checking with the customer.
So my question is how to fix this three inch hole and how to move the door opening rearward about 2".
Heartland should not have to ask the dealers how to remedy something and the dealer should not do a abnormal repair without checking with the customer.
Last edited: