Curt_Hinson
Active Member
I removed my box of goodies for my TPMS system today to see what had to be done to install the remainder of the system. The RV wheel inserts were installed by Heartland. All I have to do is install the monitor, cables and antenna. I located all of the parts per the installation manual, but was puzzled by one extra wire. This wire has a plug with the ground connector exposed on one end (much like a standard four wire trailer connector but only has two connectors) and stripped wires (+ and - or red and black) on the other end. It also has an inline fuse near the plugged end.
The installation manual does not describe it nor can I determine where it should go. I am going to try to post a picture and hopefully someone will chime in and tell me some things I don't know.
Curt
The installation manual does not describe it nor can I determine where it should go. I am going to try to post a picture and hopefully someone will chime in and tell me some things I don't know.
Curt