Recent content by bcpolaris

I am hoping that someone can help me find a motor for my rear stabilizer jack. Coming out of a RV Resort that had a steep driveway the motor hit the ground and broke in half. My RV Repair Shop can only find the entire Rear Stabilizer and Jack setup. I don't need the entire stabilizer just the...

panels The black panels that came with the trailer. If your trailer doesn't have it you can find a great price for it at your local sign shop. They just needed a little care in putting them in place. This will also keep the wind/rain and rodents from finding easy access.

ladder storage I have cut the ladder in half at the fourth rung from the top. I then inserted a steel rod into the top piece securing it with cotter keys. I then have the ability to store the lower end of the ladder on the ceiling using broom holders. The upper part of the ladder is stored on...

I thought I would show you the extra fresh water support member as well as the wooden cross members I used for the under-belly. Now the water tank doesn't sag and the under-belly will be easy to take down when I plan on insulating the floor.

I would like make our BC Chapter and any other Heartland owner aware of a Heartland Dealer in Kelowna (Kelowna Truck and RV). I had a living room slide gear that was bidding as well as some wiring that got caught up in the gear on July 3 2008. I phoned Heartland talked with Gary who was Super...

The furnace was working overtime but no heat was coming into the unit so I added another vent into the living area. This modification has made the furnace quieter (not so much back pressure). The pictures kind of shows how I went near the entrance with the new vent. I NOW HAVE SOME HEAT AND THE...

slide The slide is working excellent. We haven't had any concerns after the fix.

noconwud thanks for the insight. Could you please take a picture of the furnace area in your unit and send it to me.

thanks goldwinger I will be cutting the ladder down.

That rear door is a very common issue. When i purchased my 3210 2008 I thought I was getting the one with NO man door in the garage but when I drove the 1400 miles to go pick up the rig I was very surprised it had one. Now that I have had the 3210 for a month. I am so happy with the garage side...

My modification was adding small wheels under the foot of the bed so the wooden frame doesn't drag on the carpet. The slide was dragging and causing the carpet to pile. I added these 2" wheel and now the slide works great. While I was in there I also had to reinforce the original slide wheels.

I was going to ask this same question. My old camper had a hinged ladder that would store in the basement. I might have to find a hinge that I can rivet on so I can bring it along. You never know when I might want to sit up there to watch my boys dirt bike racing. haha

We went on our first weekend trip to find out how things will work with our new 3210 cyclone. The portable water had syphoned so I only had 1/3 of my water left. I thought there was a problem when I was filling up with water because once it got up to 2/3 all three air vent hoses had water...

I am having the same air flow problem. No heat into the bedroom. A lot of heat was being lost around the furnace, I used some tin tape on sides and it helped somewhat. Still wondering how to get more heat into the bedroom.

Where would I look for the blockage in the furnace ducts. There is very little air coming into the bedroom air duct and the bathroom air duct. The two in the kitchen have a little more airflow but nothing to write home about. I did take off the front panel and the furnace is working fine as is...