Recent content by Bob120

Is there an easy method to determine if the floor and roof are wood or aluminum? Can the factory tell by the build date? My 3200ES was built April 29th 2006. Like many other posters, I purchased it on the understanding that it was an all aluminum frame and if I were to sell it some day, I would...

Interesting spot I think our weimaraner could warm up to this place. We are located in southern Ontario and are thinking about taking our Sundance 3200ES on a little trip to Myrtle Beach the week before Christmas. My wife says it would be too cold. Any comments?

Fresh water drain On the Sundance 3200es there would appear to be only one drain tap. It's sticking out the bottom near the propane piping and covered in foam insulation. I couldn't find any other low point drains. One mistake I made was not letting the pressure off the water system before I...

Winterizing Fresh Water Intake As has been suggested here and on many other sites, I removed the little screen from the fresh water intake, and depress the white valve until pink came out. After doing this I turned the pump on to extract the remaining pink anti-freeze from the bottle and it...

This is the leaking pipe

The 4 inch waste pipe from the toilet in my Sundance has a slow leak at the elbow. It would appear that insufficient glue was used to make the seal when initially connected. I thought perhaps a little glue could be inserted with a syringe as there appears to be a small gap where the glue is...

Thanks RickNG, you just saved me a lot of time. I was curious about this unmarked switch and was planning on trying to figure out what it did this weekend. I have turned it off and on various times and of course nothing ever happened. Mine is in the up position, which I assume is on, and the...

Does anyone know who makes the tires for the Sundance?