Recent content by CHRIS-123

I am running a champion 4000 watt/3500 for my torque 261 toyhauler, runs everything great, picked it up cheap, and have over 100 hours on it and no problems, burns a half a tank of fuel over 12 hours, does the job I need, and not very nosy as people say, but that's just my opinon.

thanks scotty b, just trying to wrap my head around the idea that all over it says gravity feed, to me gravity feed is a line running to the top of the tank, and that the infeed line to the pump would come out of the bottom of the tank, but I guess they must have some kind of set up that makes...

ok my trailer has the Anderson 4 way valve, it has 4 lines on the back of it, when you connect to the garden hose that line goes to the back of the valve, to the left of the valve is the winterize line that runs to the in feed of the pump, the right is the tank fill line, that also appears to be...

yes I did find it thanks, under the bed in the front on the left side real tight place to get into, but glad I did, everyone of the conections in the udc were cross threaded and pulling air. one thing I am confused about is it says the tank is a gravity fill tank right, but yet the water pump...

looking for some help I need to get to my water pump as it seems to be pulling air from somewhere, thinking it might be a loose connection at the pump, only thing is I have no clue were the water pump is on my trailer, any help would be great, I am going to start looking tonight but the more...

I had a 5.7 hemi before pulling my trailer and upgraded last February to a 6.7 diesel and like must others have said night and day towing in the hills and flat land

yes I am positive on the weights, 4690kg is full of fuel, water, 2 quads in the back, all the gear, everything we take with us normally, only difference is I filled the shower grey tank as it is farther forward to get more tongue weight as I was way below the 10% mark, once I filled that tank...

ok I may be thinking wrong here, but if I tighten up the wd bars will that not take away from the tongue weight???

ok everyone I think I came up with a solution to my problem, brought my trailer home yesterday after weighing it, and did a little exploring underneath it, founf out my fresh water tank is directly above my axels so I figured this was not helping my tongue weight when full, but did find that my...

for my torque I went out and purchased 2 butcher blocks one to fit over the stove, and one to fit the sink, notched the sink one for the faucet add some nice fir 1x3 around the edges to hold it in place while travelling down the highway, works awesome for more counter space and was cheap to do...

ok a little bit of an update, went and picked up my toyhauler this am to bring it home and try and get this sway problem solved before the long weekend, took it to the scale, and here is that I am working with empty truck weights no trailer full of fuel and the family in it, front axle 2210kg...

yes come to think of it ray when I bought the trailer they set it up when it was empty,so I may need to adjust a few things on the hitch, well I am going to try I few things suggested and take it to the scale all loaded up and will post my findings thanks again everyone one.

yes I put the toys as far forward as possible, about 3 inches away from the glass door just incase, and yes I can adjust the ball level on my hitch, I was looking back at a few pictures and it seems to me like it might be a bit high, but than others it looks level so not to sure, also you say...

That royally sucks, I really don't want to shell out 2400$ for a new hitch when I just bought this one with the trailer, thanks for your input.

hey everyone I am new to this forum, and am looking for some help or advise with a sway problem I have, first of I have a 2013 torque 261 toyhauler, bought this trailer last fall and put it to its full use may long weekend, and than again july long weekend, both times I ran into a seriouse...