Recent content by Chumbly

Re: ATF: Edge - Dometic RML8555 Frig not working I don't know if mine is the same model of fridge, (mine is in a M21), and I know it is Dometic. Anyway, I seem to have trouble with it every time I take it out the first time of the year. It seems the solution to my problem is to give the...

We've had the exact same problem with ours...the axle actually appears to be a fraction of an inch longer. Our dealer was absolutely no help. Their solution was to cut off more of the skirt. The tires eventually did wear off a piece of the skirt. With exacting leveling we were able to...

Yes, they do recline, but don't swivel. We got them at Jysk, (I think that's how it's spelled), but, I had to fabricate alot on the base of these seats, (includine cutting and welding), to get them to work in this application, so it would be very hard to copy. A big problem I ran into was the...

Please excuse the mess... I replaced the uncomfortable bench sofa with this. In the future will be added a skirt around the bench and possibly a covering for the bench as well. Even though holes were drilled in the process, everything can still be returned to original...if the need was to arise.

In the 1st pic is the solar panel, (of course), mounted on a step, with a rod at the bottom to give it a better angle to the sun. In the second pic, basically the same thing but at a different angle. I built the bracket that holds the panel to the step, myself. The 3rd pic, shows where I...

In a previous post, I was asked to share some pictures of my solar panel setup...here goes-

Just remember to latch the stove vent before you tow your trailer...otherwise it will flap in the wind and break... it happened to us.

I wonder what the studs are made of. In the front, under the bed, the framework is all aluminum...if the walls were the same, attaching to a stud there would/should be no problem.

Wow, it's so disturbing to hear this... man, we feel for you guys. Is there any way to take it back to where you purchased it? Really, if you look at how these units are made, IMHO, in order to properly fix this, you'd basically have to separate the frame and floor from the whole top, (because...

No, I haven't posted anything yet. My system consists basically of a two part setup. I use/bought two, 100watt, 12 volt (this is important), mono-crystalline, solar panels produced by Grape (the cheapest I could find).... I wired them (you have to use proper cables and connectors), to control...

First thing I wanted to change was the sofa...so I ripped that out and put in two recliner style seats, (we usually only camp with the "Little Lady" and myself), I built a couple of drawers for beside the bed, installed a Solar Panel setup, (for lack of a better term), electric jack, (for the...

I believe the "Gray" water valve is the front one..."black" water is the back one. (at least on the 2009) The grey water tank is in front of the black water. Behind some of the drawers maybe be wiring, plumbing, etc... might want to check that out. We've made a few changes on ours to "make...

My problem was mostly with the base part of the sofa, especially at the front. I looked inside the seat bottom and found basically an aluminum frame, with what looks like box straps between the front and back frame, and covered with some light foam on top. If I was to rework this seat, I think...

I recently replaced our bench/bed with two recliners. It was alot of work and took alot of fitting and refitting. I think that the biggest problem you would have is that the plywood base is so high off of the floor...and don't even think of cutting it out, that's where the gears, etc. of the...

Curious, ...How do you do that, and still latch the window?