Recent content by Clark2262

Well, I’ve got the same problem. No power to my “pre-wired” camera. Guess I’m not surprised. Most of my switches are incorrectly identified and in the wrong place. Even my satellite connections were wired incorrectly: Bedroom was living room and living room was bedroom. That’s two hours of my...

No. It was in the shop most of the winter. I called them before I went to pick it up and they said no water in the door. I said "What!" I went to the shop after it had been raining for days and thought, well, it will be full of water but no! Could not believe it. Got it back to the...

I checked with Pullrite and they did not have a problem with the MORryde pinbox. If you think about it, MORryde cushions the movement on the bolts, like it cushions your ride.

Gooseneck

Really good points. Now that you mention it, the Andersen was a much tighter fit on the kingpin than the Pullrite. I had to use WD-40 and some wiggling to get the Andersen adapter on, but not the Pullrite. You may be on to something. The design of the Pullrite adapter is really very...

Yes, keeping MORryde. The hitch was not causing the issues with the MORryde pinbox or vice versa. Actually, the issues I had with MORryde were with two different hitches and trucks. MORryde sent me a new, heavier spring but I did not get it in time before my last trip. I have it now and...

The failure was with the two bolts that surround the kingpin.

I replaced my Anderson with the Pullrite after it failed in a minor collision. So having used both hitches, I can say that there is not a significant difference. Anderson puts the socket on the pinbox and the ball on the hitch. Pullrite puts the ball on the pinbox and the socket on the hitch...

Well, not good news at all for Pullrite. I pulled about 70 miles to the shop. Removed the pinbox adapter so the shop could move my trailer around as necessary. I discovered that both of the bolts that secure the pinbox adapter to the kingpin were deformed. I called Pullrite and they said I'm...

Ordered the new spring from MORryde. They offered me dealer cost which was very kind of them. I have high expectations that this will resolve the back and forth movement. The spring is rated for up to 23,000 lbs but the pin box is still rated at 18K which is the gross weight for my trailer...

Thanks for the pep talk. I'll do it!

I spoke to MORryde. Looks like I'm going to order a larger spring, the largest they have, which is one up from my current spring. The cost is $199.

I have the MorRyde rated at 18K and I'm not happy with it. My trailer is rated for 18K and I'm probably running at 17K. I talked to someone in the campground last week and they have the same problem - horrible chucking. The back and forth bouncing is really bad. I've towed it with an...

This one is new to me. A pin seems to have wiggled its way out and managed to cut a slice through my door. Has anyone else ever seen this one??