david-steph2018's latest activity
-
Ddavid-steph2018 replied to the thread Inverter transfer switch part help with pics (Molex connector).The photo showing the Molex connectors is the setup we used to have in our Road Warrior. Let me guess, the transfer switch is for your...
-
Ddavid-steph2018 replied to the thread Trim on slide out.All of our trim is pin nailed in place. But when I worked on our BAL-system I could reach over the top of the trim to get to the cables...
-
Ddavid-steph2018 replied to the thread HW50C Failure.Thier signature says Progressive.
-
Ddavid-steph2018 replied to the thread Equal-i-zer hitch.Do you know what the weights are for the set-up? I suggest you do 3 weights of the rig. First weight is the Ram loaded for the trip...
-
Ddavid-steph2018 replied to the thread Inverter/converter location.When you find the converter, check the external fuses. These will blow if the battery terminal is reversed, even for a split-second.
-
Ddavid-steph2018 replied to the thread RESOLVED. City - Campground Fresh Water Best Water “Pressure” Capable… and refrigerator water/ice on/off valve location?.With the PEX plumbing, people claim 65 PSI. But with our pressure regulator, it is set for 55 PSI. As mentioned, check all of the...
-
Ddavid-steph2018 replied to the thread Inverter/converter location.There are basically 2 types of converters, stand-alone and the model built-in to the power center. The stand-alone are plugged into an...
-
Ddavid-steph2018 replied to the thread Landing Gear Crank Cover Replacement.Yea, good luck with that!!!! Maybe design something to attach to where you could use a drill to help. Something like a socket with a rod...
-
Ddavid-steph2018 replied to the thread Landing Gear Crank Cover Replacement.Also to keep rain out for now, clear Gorilla Tape will work
-
Ddavid-steph2018 replied to the thread Landing Gear Crank Cover Replacement.Here is a manual for the system: https://ultra-fab.com/wp-content/uploads/2018/07/5th-Wheel-Jack-Instructions-11-30-17.pdf Look on page...
-
Ddavid-steph2018 replied to the thread Landing Gear Crank Cover Replacement.Look in the hole, you may have a shaft with a notch in the end that the crank slips over. Usually there is the crank on one side, but it...
-
Ddavid-steph2018 replied to the thread Landing Gear Crank Cover Replacement.What type of landing gear system does the rig have installed. The crank can also be used to the slides. Post a pic of the landing gear.