Recent content by EdgeOut

We took this idea to our bed on the Edge 18 works great Thanks

On the Edge M18 19,21 and 22 what tires do people have on their units. We have a 2010 M18 that we just purchased and it is using Towmax. Have people towing the Edge with Towmax experienced any problems? Thanks

Re: Edge M18 Winterizing PICTURES Now Dan Thanks so much. That is what I thought. We just came back and I did turn it to what I thought and you confirmed was winter mode to Normal Operation Mode. Thanks agin now DW will have a Hot shower when she uses it. Sorry for all the questions and space...

Re: Edge M18 Winterizing PICTURES Now Now have taken bed base up and got good pict of Water Heater system The way the valves are now from dealer supposed to be in operation mode. I think the valve between the red and blue line in perpendicular and should he horizontal for normal ops. Looks...

Any suggestions for resizing pictures on a Mac for the Profile & Avatar. Thanks

Our 2010 Edge M18

Re: Edge M 18 Dumb Question Dan & Ann Thanks much Just wanted to make sure on this model that after emptying the fresh water tank I can run City water and the Water Heater will remain filled. Thanks - - - Updated - - - Dan: WE have always replaced the anode rod yearly..we figure it;s cheap...

Edge M 18 Dumb Question Forgotten more than I have learned in our RVing days. Since there are no manuals etc with our 2010 Edge M18 I have a couple of questions from the "knowledge Group". 1) If we empty that Fresh Water Tank and then hook to City Water we are assuming that the Water Heater...

Hi We have a 2010 Edge M18. Does anyone know the: Manufacture of the Entry Door ( ours is regular lock and a deadbolt)? Manufacture PART Number? Our is getting a little had to lock and it may be time to replace. Many Thanks John and Kris Aiken SC

Thanks for the suggestion ,however there bed in the 18 does not lift up one must crawl into the bay and unscrew a panel and then try to work on the systems. Later, if this is confirmed, I will perhaps try building a hatch on the bed platform to gain access from above to get at the pump and...

"John D That id the DW's plan Thanks John B"

Dan Well am familiar with the process but from past experience each manufacture runs line etc differently. Since I am 70 and have braces on both legs, bad hip and back ( yes a wreck) and have to crawl into the bay , unscrew the panel and then look inside I thought some labeling or picture would...

Thanks Dave Have looked at this but am trying to get a schematic specific to the M18. John & Kris Aiken SC

Thanks But we don not think so as the top and bottom mattress are the same and we have seen other 2010 M18's that clearly show a gap . But thanks DW is looking for a new mattress or inserting a piece of foam into the area and putting a memory foam on top of it all. John & Kris Aiken SC

Hi All: I know its 90 plus degrees here in the South and for that matter hot everywhere else. Since we are new to our 2010 Edge M18 is there any specific info on winterizing the edge, i.e., like by pass valves, suction hose for the pump, valve labels and turn instructions and or pictures. I...