Recent content by HOGHAULER

For what its worth after installing traveler on roof had Dish come out and install a Hopper 2 with Sling. Only issue was when tech checked coax which was correct # the end connector where not . He installed blue ring rated for HD rated units. Been working great since [about 3 years].

I cured issue when batteries needed replacing ,with sealed AGM Interstate batteries. no need to check sealed so no ventilation needed as is supplied by covered box with in and out ventilation .I sealed off incoming vent and cut top to make cable interfering with cover a none issue. Change to...

Looks to be a electrolysis pin hole most likely from corrosion between alum. tank and brass fitting, Teflon tape not very successful at being a insulator. A nylon fitting into tank to water input line wound be best choice. Do google search for effects of electrolysis from dissimilar metals...

Here you go on Amazon Sent from my moto x4 using Tapatalk

I bought the DeWalt pancake style compressor that reaches 165 PSI I needed it because my new h rated wheels and tires need 125 psi in my old little compressor wouldn't deal with that you can get that compressor for between $170 and $ 190 it's good unit ! Sent from my moto x4 using Tapatalk

low point drains have quarter turn valve and the fresh water tank overflows are just a hose usually white vs the low point drains are red and blue. My Anderson valve failed and while on city water was putting water into tank causing an overflow. Short time workaround was running on tank...

Dan is correct the filters are on the door side you snap off the white round plastic and they're the same filter material you would find in a standard AC roof return their washable and easy to replace just a lot of them from front to back.

Morryde makes most all of the mounts open use. They will be available on line. - - - Updated - - - TV Mounts For RVs | Made By MORryde | MORryde.com www.morryde.com/(574) 293-1581

move out of ca!

Here you go. Should be easy. Sent from my SM-T810 using Tapatalk

Trade in Honda for new Wolverine x4 which is 59.8 wide . Just a suggestion

Make sure you cut out the kinked part of the line because that will eventually leak down the road causing big water leak damage. Ask Me how I know!

Can you post link to where you purchased and part number. Thank you Good job

AS silly as it sounds use fade control front to back fading from outside to inside.

Best Product i've used is CLR is made for rust etc.After removing spots treat awning with 303 spray and follow directions .