Both gages should work when you turn on the switch inside for a few minutes you should have at least one bar swap the two sensor wires on the back of the panel see if it works and the other one doesn’t
Does your on light come on when you flip the switch ?on the gage panel push the on button the pump should come on push the off button the pump should purge then go off looks like you have 2 tanks mine has to have about 10 gallons before the gage moves . You should have 1 bar on both gages even...
Need actuator or latch assembly for zero gravity ramp door lock on 2022 Road Warrior Passenger side curb side or whatever it is called it is Trimark brand but doesn’t have any number on the motor
I know exactly what you are feeling, we bought a 2022 Road Warrior in February it was missing furnace ductwork we were told to take it to Cleburne mega center it was there for 4 months several other things happened to it while it was there every time we were supposed to get it back it needed...
I have a 22 375 road Warrior mine is behind the wall between the pass through storage and the wet area mine got unplugged while working on some plumbing issues but check your gfi receptacle and breakers
I just finished raising all 4 rears mine was simple with impact and 3/4 wobble socket , my 375 is just a tandem axle yours is probably harder to get to
Thanks for your opinion I will raise them today , my rear art pretty close to the tires so they might be ok , friend of mine bent a middle one . Come to southern Oklahoma I’ll do it for you
I’m going to raise my center jacks up one bolt hole 2-1/2 inches we have several low water crossing and railroad tracks to get to our camp site. I’ll carry blocks if I get in a situation that the center jacks are short . Anyone tried this any thoughts. Appreciated
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.