Recent content by KaylaW

It is and has been plugged into a proper 50amp plug. It was only plugged into the one with a missing ground for a few hours.

Update: The issue of half the plugs not working was the circuit board in the panel. Not really sure how because it appeared to be working fine but we replaced the board and the plugs all work. Now just have to figure out why the converter is barely charging the batteries. it does charge, but...

Its WFCO WF-8930/50

Do you think it's possible my panel is bad? I just checked the plug at the back of the panel where the converter is plugged in, which also is about the area where we got sparks from, and the outlet for the converter is only reading 7v. The converter itself is readying 10.5 which is the same as...

Apologies. I have a 2022 Heartland Prowler 303BH. We were planning on tracing wires today. Beginning with looking for any junctions. My underbelly is enclosed so I can't see anything down there and don't really want to pull it all off unless we need to. Would anything I need to look at be...

There is no power in the wires to the GFCI and power fluctuates between 0 and 50v at the microwave outlet.

It's for the plated "outlet" on that same wall. It's to add whatever you want.

All of the outlets on the opposite side of the trailer are working and reading 110. Every outlet on the GFCI shows 0 volts with a voltmeter. The outlet the microwave was on fluctuates between 0 and 50 volts, rapidly. We replaced the breaker that the GFCI and microwave were on and have not...

I'm going to try to give every possible detail that may be related to the issue so bare with me. I've been in circles trying to figure this out. A chain of frustrating events happened before this but basically, we ended up plugged into 110 with no ground (I know...). My boyfriend thought he...