Recent content by mganoe

Ok so etrailer had no clue and after being on hold with Reese for literally an hour I finally spoke with someone. The measurement from the center of the pin to the back bolts on the pin box are 25 5/8". The only thing I don't know is how much material they leave from those center hole to the...

Curious does your kingpin actually ride below the rails, or is it slightly above? Sent from my SAMSUNG-SM-N920A using Tapatalk

That's good to hear. I tried calling etrailer, but they have no idea on the measurements, so I then tried calling Reese and was on hold forever. Perhaps I'll try again on my way home from work and see if I have more luck at the end of the day. I'm running on a 14 3500 drw myself that is...

Good to know. Thanks for the info. Sent from my SAMSUNG-SM-N920A using Tapatalk

Did the kingpin sit down far inside the bed rails? I'm thinking I'll just need to call etrailer and ask them to take some measurements for me to know for sure. Sent from my SAMSUNG-SM-N920A using Tapatalk

The weight rating was really my only concern since it's only rated for 16k. That being my original was only 16k as well, but when I bought the Flex Air I went with the 18k just in case I was a little heavy. Have you had any issues with yours? Sent from my SAMSUNG-SM-N920A using Tapatalk

Is anyone running the 1621 equivalent of this kingpin? I need to know the straightline measurement of the assembly to determine if it can run inside my bed rails without contacting the sides. I am currently running a Flex Air and I think the overall length of the kingpin is longer which is...

Forgot to add thank you to the both of you for responding so quick. Sent from my SAMSUNG-SM-N920A using Tapatalk

Excellent news. I tried to find that out at the Hershey show last year, but they wouldn't tell me till I drove clear to NC to have the install done. To be honest I'm really on the fence so time will tell. For anyone that does not have the auto leveling I just installed the levelmate pro and...

I realize this is an old thread, but was hoping someone might be able to give me an idea if when doing this type of an upgrade are they able to re-use the front landing gear and existing pumps thereby reducing the install costs, or do they need to replace all components? Sent from my...