Recent content by NYSUPstater

Like others w/ factory installed toppers, the angle for drainage has a lot to be desired. have heard about the beach ball, but how do you go about putting them in? Taking them out? Not being a rocket scientist, seems that someone would come up w/ something that can be installed on slide to help...

Ordered them along w/ the 2nd awning on our '18 3560SS. LOVE 'em!! Beats having to get up to sweep the slide tops off every time. Yes, ours do not have much of a pitch to them so water will pool on top, so best not to stand near them while being retracted cuz it will be alike a cow peeing on a...

Well a year later, 1 valve replaced this past spring (albeit a plastic one) on HW tank, followed directions on label at docking station...........and WHOLLA NO probs winterizing it this year and NO anti-freeze going into HW tank !!!!! Still have orig A-valve. Didn't blow things out, but made...

Sadly, NY will probly follow suit. Many have said that with all this push for solar, wind energy, all have a limited lifespan and are NOT recyclable and have to be buried someplace. On top of that, there is NO way enough power can be generated to meet the needs of usage. Do the Einsteins of this...

FWIW, I have just the reg 'ol Interstate battery and remove it upon putting it into storage and then put it in cellar on a piece of wood then add just a battery tender to it for the next several months. As far as brand of tender, most of what I have are from Harbor Freight and another is Battery...

One prob we had/have is once it's lit. getting oven up to temp. Want to say that the prob was amount of gas in tank. If it's low, oven won't stay lit. Grrrrrrrrr.................

Ours is not like this at all. The white item (Studor Valve) is, ours has a cap instead. Plus, the black pipe on ours is loose. So if I p/u a Stupor Valve, do I just remove (somehow) the cap on ours, and replace it w/ the Studor? Then hand tighten the pipe back onto the drain pipe? Thread tape...

So I finally got my butt in the coach to check the area under the bathroom sink. What I found was a 2" (?) pipe that was threaded on one end and screwed (although very loose) onto drain pipe for sink and a solid cap on the other end of it. Wasn't very long overall, maybe 4" tops. So I screwed...

Last year our DD and SIL mentioned to us that they could smell a musty like odor in bathroom. Well, I agree there is some kind of distinct odor, but cannot see any areas that are wet either under the sink, walls, ceiling, etc. When I had my issues of winterizing it last year, didn't see any...

What do others do to lesson the adapter that screws into CG pipe fittings? Yesterday I had 2 that got stuck and only way I got them out was w/ a screw driver and hammer. Do not recall this ever happening before, but really don't want to go thru that again. Soap up the threads 1st?

I 2nd OC's post and would like to add to run his procedure thru the hot water heater as well both times. Have done it this way for years and still alive.

You can p/u a nice HD Kobalt or Craftsman 1/2" drive TQ wrench for under 100 bucks at Lowes as both will go to at least 200 Ft Lbs.

E

Well as fate would have it, need to get new tires for Casper. Went to tire shop last w/e for rotation only to have them tell me they can't/won't due to low tread (3/32-4/32). Foooooey. Was going to get new ones in Oct, but with upcoming long trip planned, figure to play it safe and get new ones...

Congrats Sir and enjoy life's road ahead.