Recent content by RossRagan

Did you ever get any responses? I leave mine plugged in all year but disconnect the batteries. In the winter, I bring the batteries in the house but leave the unit plugged into shore power with a cover over the trailer. I don't know how well the onboard charger monitors or regulates a trickle...

I have a Furrion Observation that worked great with my M245 until I put a topper on my truck. Only works now if I roll the window down and hold it by the open window. Sent from my iPhone using Tapatalk

With regards to my comment, the furnace did work at the PDI. I remember it well, because it was forty degrees when I picked it up. There are two wires going to the ignitor electrode with automotive style spade connectors on each wire. One of those connections was not. I couldn't get my hand...

Mine failed on day three two weeks ago while out camping. It was my first trip where furnace heat was needed. I found and fixed a loose wire to the ignitor electrode early this week and the wife and I are camping again this weekend. It was 21 degrees at bedtime last evening with a light...

Thank you to everyone for your feedback. After checking with a couple of other RV dealers in the area, I learned that there is a shortage of tech's to work on RV's and no one would be able to look at my furnace until mid-late November. I decided that if I had to wait until the 15th to get it...

By tapping across the rotating section with my knuckles, I could tell that there was a wood "stud" running top to bottom through the center of that rotating section. In the photo below, you can see where the center bolts are located (there are three black lines rather than two (one of the black...

Is Heartland responsible for the warranty service on the furnace or is Atwood, as the furnace manufacturer, responsible? If it is Atwood, there is an RV service shop about 5 miles from me who is an authorized Atwood service shop.

Since that was an easy service, I went ahead and replaced the regulator...the furnace is still not functional. Good news is that everything else connected to propane still works. ;-)

Out of curiosity, what symptoms did yours exhibit when it died?

Appreciate the feedback. I got the rig at the end of March and have used it several time over the summer, but never had to use the furnace. I had been cooking with the stove burner Monday and Tuesday last week before the furnace stopped functioning so there shouldn't have been an air in the...

I used my 2018 M245 Furnace for the first time last week. It worked fine Monday and Tuesday but I had to use an electric heater on Wednesday and Thursday to keep the trailer at a livable temperature. Symptom is the fan kicks on, runs for maybe a minute or two then it shuts off. After a while...

When I installed it, I thought I had it fully elevated, but, according to RickL, there may be one more notch to go. I will check it out when I get the opportunity.

\ Great idea...I like the mount on the ramp.

My TT was prewired from the factory with the Furrion camera mount. The factory wired the mount into the vehicle lighting so it is powered as long as lights are on; i.e., it is wired for the observation camera. I purchased the Furrion observation camera and was a bit disappointed at the display...

And I found this owners manual online: http://www.dyersonline.com/downloadfile/download/aitfile/aitfile_id/3271/