Recent content by Sudsman

  1. S

    That's interesting, Jensen player on and off

    This is weird, I’m having the same issue as you. I have a 2018 bighorn. My system is a Jensen JWM 9 A. I pulled the unit out, disconnected the positive and ground wires. Reconnected them with Dielectic grease and everything worked great for 2 months on the road. Today it started doing it...
  2. S

    Water weeping from hot water tank pressure valve.

    So does it work only during water pump usage? Currently my issue is when using city water, not water pump.
  3. S

    Water weeping from hot water tank pressure valve.

    You guys are all amazing, going to go with the expansion tank.
  4. S

    Water weeping from hot water tank pressure valve.

    It is adjustable, yesterday I dropped the incoming pressure to 10 PSI, then ran it up to 60 PSI. Ran water then lowered it to the normal 50 PSI. Still weeps. Grrrrrrrrrrr!
  5. S

    Water weeping from hot water tank pressure valve.

    That’s the frustrating part, I did the the bleed out air thing, it weeped, I chGed the T / P valve with a new one, it weeped, i used only electrical for heating, it weeped, I used only gas to heat, it weeped. think I may remove the pressure regulator from the system and try that.
  6. S

    Water weeping from hot water tank pressure valve.

    I have done the open slam shut thing on the T P valve air a bunch of times. Still weeping. Where in the system does the expansion/accumulator tank go? And does it only work when using the water pump? All my issues are while using city water. Thanks everyone you your advice!
  7. S

    Water weeping from hot water tank pressure valve.

    All good things to check. Thanks everyone. I will try these and get back!!!
  8. S

    Water weeping from hot water tank pressure valve.

    Temp is reading 131 degrees. 🧐
  9. S

    Water weeping from hot water tank pressure valve.

    Hummm, the relief valve is preset to 210 degrees, I replaced it just in case. The water gauge I have is telling me my water is 131 degrees. stumped.
  10. S

    Water weeping from hot water tank pressure valve.

    I made sure to drain about half the tank from the anode plug, with the pressure relief valve closed, to be sure I have an air gap at the top. after heating it up, still weeping!
  11. S

    Water weeping from hot water tank pressure valve.

  12. S

    Water weeping from hot water tank pressure valve.

    I have a pressure regulator, set at 50 PSI. The new valve ( and the original) are factory set at 150 max.
  13. S

    Water weeping from hot water tank pressure valve.

    My 12 gal suburban water tank has been weeping water from the pressure / temperature valve. I replaced it with a new valve and filled the tank. As soon as it reaches full temperature, it begins to weep. What am I doing wrong? It’s driving me crazy. Thanks in advance!
  14. S

    Paint T/U Pen

    Well, I think you have something there! Thank you for your input!
  15. S

    Paint T/U Pen

    I NEED TO TOUCH UP SOME NICKS IN THE FRONT CAP. LOOKING FOR A WAY TO GET THE PAINT MADE. NONE OF THE AUTO /RV SHOPS SEEM TO BE ABLE TO MATCH IT. ANY HELP IS APPRICATED. 2018 BIGHORN ~~COLOR BLACK 920887K AND CREAM 937265K
See more
Top