Recent content by thirdtimeround

**** I am absolutely dismayed at how the Factory will tell you're driving a house down the road (after the sale ) so expect problems. Problem is they are building that house on wheels to be towed down the road. So with a little more care and quality, most of these issues would not exsist. I just...

Where the fixed glass panel meets the door frame there are 3 or so small little stops that need to be removed. Also at the top and bottom of the fixed panel in the track are 2 corner braces ,remove those and slide the panel over and out. Mike

I have done this to my 2014 3110, 2 weeks ago. Very easy and no parts to buy. Only had to re-drill two of the fixed panel door glass ,corner track bracket holes. Take the wheels off the bottom of the sliding panel and ,put them on the top of the door ,flip the door over and put it back in the (...

Called the dealer 2 weeks ago . They were going to contact the factory ? I'm in the middle of extending my garage 2' because of Heartlands 38'2'' to pin measurement. Even if you add a foot to the pin for the nose, the 3110 is 40'4''. This thing is causing the exact opposite reaction of what it...

Ok, I'd like add our real world info from our first trip. NY to FL 1,364 miles and started with a full tank of diesel and DEF. The fuel mileage was 9mpg. The DEF usage very poor. I used 3 more 2-1/2 gallon containers to get to my destination. I buy these at Wal Mart for $11.97 each. So I used...

Ramdaully4100king ,said " your screwed WRT trying to level a 4x4". What is WRT? I'm old, and tired and beat up from life and try not to think to hard at tis point. Mike

Its bad, but wish mine looked that good, Mike

What's WRT ? Water tank is full. Not into bricks,but will be adding a 35 gallon fuel tank. Looked at that Mor Ryde on line. Boy that video shows our axles just taken a beating ! But from what they say it gives you up to 4'' of leaf spring travel not 4'' of lift. I was on line earlier and...

Romandiris, That is funny ! My back hurts thinking about it!! I have all those tables under the bed with 2 heavy shipping/moving blankets. I took those straps off and relocated 1 each to he edge of the bed on each side. I then put the 2 kitchen stools on the bed and strap them down lightly...

So I hooked it up today, and parked on fairly level ground. I am now just 4'' higher in the front than the back. I have 7-1/2" of bed rail to 5th wheel body clearance. But it looks like the pin box to bed rail clearance is awfully close on level ground when turning. Forget about using my slide...

Guys , I'm feeling like a couple of Beers and a campfire are in order, I'm buying! I started this post and if we could "direct that energy to Heartland" it would serve us all better. I did this back and forth with a member the other day. HL has to be sitting back and laughing. Fact is you both...

Thanks Shawn, You're right it's looking like POR and maybe something like you are speaking of over that? Every chemical I look up has some sort of side effect on paint , chrome, aluminum. The problem is most of these wash's work on bare metal, and don't like a mix of paint and metal. I think...

Hi Duane , I have Cyclone 3110. So when my slides were in you were denied access to the garage from the living room, yes the door would be behind the frig wall slide out. The real reason I did this also is the sliding door handle would hit the slide wall trim. The 1st time it happened (coming...

Hey Tony, it was fairly straight forward. I "did not" have to buy 1 new part! It's not that the door is out square as much as the sides were not shimmed in enough. It even looks right. Makes sense for me as my wife was having a tuff time climbing past the Harley with a clothes basket to get to...

Best response yet ! You're right on the money. Its captivating to see how we all think. I feel like I'm watching OJ drive the Bronco down the freeway ,you know it's crazy, walk away ,only to come back and look again. My objective was to see how people feel about issues we have "if any" with...