Recent content by tsoileau

I have a Big Country 3250TS. Did some cleaning on furnace and son deleted pics of wiring. Is the wiring correct? If not, please help.

Well it is now October 2010 and the flooring looks the same as it did when it was first installed. I haven't had any problems with the flooring and am thrilled that I did it. I just removed the cabinet in the bedroom that holds the tv and will put in a 32" with a wall mount. Just wanted to...

It is a BC. I would have guessed UV also but the other compartment doors have not changed at all. Just was wondering if anyone else had experienced this. Thanks

I have one of my compartment doors that have changed colors--it has more of a yellow tint instead of white like all the other doors and the exterior of the RV. Have any of you had this happen or any suggestions? Thanks,

I ordered my mount on line at mountsandmore.com for $49.00. It is a Premier Mount AM2. In fact since I received a break on the shipping, I order an extra for my outdoor kitchen. Hope this helps. Ted

It is a floating floor and the wife is trilled. I am starting to wonder if maybe she didn't pull up the vinyl just so I would have to pull out the carpet-lol:)

Modifications It all looks good and I appreciate all the feedback with the modifications that you did. It is great to share and give us all new ideas. Happy New Year to all Ted

Nathan, I have been having the flooring in for about a month and a half and the slides have been in and out many many times. There is a lip just in front of the slide which is just a bit lower than the flooring. My slides do not appear to have rollers but a white plastic guide. The guide...

talley, The mount that I used is easy to remove with a single set screw which allows the bracket to slide up and off. I used a 3/4 piece of plywood and covered with felt purchased as Walmart-the screwed it to the existing wafferboard. When I remove the screws holding the cover panel, then...

I had something similar to what you have but it took storage space--what I did was use a three-quarter inch piece of plywood and wrapped it up with black felt that matched what was already on the cover panel-i did beef up the support for the cover by ripping some two by fours--there is a gap...

flooring I decided not to put the padding since I was concerned about the thickness that would be added. Some of the reasons to use the underlayment is to compensate for uneven floors and a vapor barrier but neither is a problem with the BC-the floor is very even and there is already a vapor...

Just wanted to share a modification (installation) that I did for a tv in the storage compartment. The TV is a 32" LCD HDTV that is connected to either the antena or the satalite dish. Also, not shown is a device that I use to control the channels on the dish receiver from outside that is...

Finally Pictures Was finally able to open the slides. Have had snow to contant rain. The flooring is still holding up well. Will also post pictures of a tv installation that I did--will place these in another post. Happy New Year ted

flooring Will go ahead and try to post some pics this weekend. It's raining outside and I'm going out of town. The vinyl bunched up on mine also and stayed rippled. I believe that it was not glued down (if at all) very well. It looked like it was some kind of double stick tape. The hardest...

changed flooring Pulled out all the old flooring including carpet and vinyl. Replace with snap together laminate flooring. Bought flooring at Lumber Liquid. and some prefinished molding at Lowes which match the molding already in the camper--plastic with glued on wood grain. Looks great and...