Search results

We had a problem in our bedroom with the bedroom slide marking the carpet in our new 2007 3200ES Sundance...also had same prob in our 2007 2800RL...our dealer service dept fixed it in the first unit so we were 'educated' when we got the 3200..they just raised the slide a bit and we haven't had a...

Oh and noone is more freaky than DW..and she feels safe in our 5er

We have a 2007 3200ES we just picked up last May..(traded our 2800RL 2007 for the 32)...as stated all cargo hold locks are the same...and lets face it locks only keep out the honest folk..if someone wants into our basement..have at it...I'd rather they not wreck the doors getting in... As for...

I lube mine and I find it makes a difference in the amount of noise and also the speed of travel of the slide. I guess anytime you have metal moving on metal a little lube will help. I also ues a slide rubber lube on the wiper rubbers helps keep them from sticking and squeaking. Have Fun Rick

Way to go JD . Hope to see ya down the road someday Have Fun Rick

JJAK Dont feel bad give it time your turn will come :-)None maybe you will be lucky and have a different problem and then the rest of us will feel left outNone Have Fun Rick

Thanks Everyone With all those suggestions I should be able t make it so secure it will never come off again. Have Fun Rick

There is a small metal drip edge across the bottom of the shower door that fell off the other day it looks like it was held on by a adhesive of some kind. Has anybody else experienced this and what was the fix. I am thinking maybe a couple of short metal screw would be better than an adhesive...

Hope you enjoy your Sundance as much as we do ours Have Fun Rick

I think this link will go to the post with the PDF files for the schematics hope it works It is Item 5 in the post Rick //heartlandowners.org/showthread.php?t=2507

JJAK17 We had some problems with little critters getting into the storage area last fall (red squirrels) I live trapped 6 of them . I did close up some of the holes with flat stock aluminum but they still got in not sure where. I havnt had a chance to look over the new rig 3200ES yet to see if...

The weather finaly turned a little warmer here last Thursday and Friday morning the sun was shining and it was 60 deg . Got a real bad itch so proceeded to take the snow blower and remove the drift of snow still in front of the Sundance and within an hour the rig was in the driveway being loaded...

Chopper just put er in low gear and let it idle

Nonehmmmmmmmmm Have fun Rick

Osims Congrats on that new rig I am sure you will enjoy it . Nothing like a new truck to put a smile on a guys faceNone If you see us going past you give us a toot;) Have Fun

Sislv Thanks for the tip another place that I will have to have a look at on our new unit. Have Fun Rick

Nhunter I dont have any good ideas about getting in to uncrush those ducts . I am thinking that it will mean taking down the belly wrap and going up through. In my case they might be able to get to it by taking the furnace out and reaching in from there as it is at the tee to the main duct run...

ToyHauler Did your service people actualy look inside the duct work? It only takes a minute with a small mirror in the vents to look at the condition of your duct work. Take the 2 screws holding the vent cover down out and remove the cover then put the mirror down into the dust work and you...

Jim Appreciate that Thanks Have Fun Rick

Jim You stated that you paraphrased Scotts reply so I thought you might be able to eloborate on 2 statements that are in it that I copied below. Maybe someone else can help but I am kind of in the dark. (from Heartland RVs) . "The tank phenomenon usually occurs when someone overfills their...

We have purchase our second Sundance 3 weeks ago. Have Fun Rick

FISHN2DMAX I understand your concerns as all prospective owners or new owners. I have just purchased my second Sundance and have confidence in the Heartland product or I would not have purchased my second one. I do have a very good dealer that makes sure any problems that I do have are...

Uncle Rog Will have it checked out by dealer service along with the crushed furnace duct and a few other little things . Just got my 2800 the way I wanted it and traded for this 3200 and have to start over . Oh well:D Have fun Rick

Hey Chopper I was just figuring that the Sundance had an advantage over the BH and Lmk None Wrong Again:( Have Fun Rick

A question for all Sundance owners. Have you noticed when your fresh water tank is full that it bulges down below the frame about 4 inches? First trip out last Friday to do dome drycamping so loaded up with a tank of water noticed some dripping from underneath and upon looking seen that the tank...

JJAK I have had a post over on the Sundance section for a few days now with no response so give it a try. Rick

I have attached a couple of pics not an easy place to get a picture of inside a heat duct so excuse the quality. This is the situation inside my ducts. You should be able to see the duct coming from the furnace collapsed down to a small triangle. The main duct is also squeezed down at the same...

I have a problem with my furnace as well and think I have found the cause of it but still have to get the dealer to have a look at it. I found that a lot of air was also escaping from the furnace box itself because when you pulled the kitchen drawers out they were very warm to the touch. My...

Scott Thanks for the drawings they will sure make life easier. Rick

Have a similar problem I need to know the wiring diagram for all the Coax connections. There must be a schematic for the Sundance models someplace . All I got with the unit was a owners manual for a Landmark which does have a wiring diagram in it but it does not fit the Sundance. Have Fun Rick

Is there any possibility of getting a wiring diagram for the TV coax . It looks like the amplifier is in the bedroom jack and I am wanting to feed my satalite reciever to the bedroom outlet from the entertainment center. Is there an owners manual for the Sundance both Sundances I have bought the...

Today I had my first chance to give my new 3200ES a good look over from the inside. Because it is still around freezing here I had been running the furnace while puttering around inside and when I pulled one of the kitchen drawers out it felt realy warm. The furnace is right next to the drawers...

chipster We have a SB and do not use a slider hitch have had no problems yet. As far as turning I can swing almost 90deg and if I go farther in degs the trailer is only goin sideways so its time to pull ahead and straighten up some. I realy think it is a personal preference if you feel safer...

Its OK guys if ya all want to come up to the Sundance area love to have ya None Enjoy that new rig Jimmyt5 we are still wainting for the snow to stop so we can get our new 3200ES out. Have fun Rick

Looks like someone got in a bit of a rush and forgot to cover that up. There is none like that on my 2800RLS I will have a look tomorrow at my new 3200ES havnt had a chance to get up close and personal with the bottom side of it yet. Have Fun

Hi Duke As a previous owner of a 2800RLS I never saw what you are describing. The slides when fully extended are snug up against the walls and dont move . It sounds like that slide is improperly adjusted or not fully extended and in proper lock position. Tell the dealer you are interested in...

We are now the proud owners of our second Sundance a 2007 3200ES . All we need now is for the weather to warm up a bit and we will be on the road for another wonderful season of camping. We enjoyed our 2800RLS but did find the floorplan did not match all our requirements. Have Fun...

The 2 1x3 boards are there to get the MicroWave to the right height in the cabinet as the rubber feet are a little too short to clear the bottom trim on the cabinet(there must be longer rubber feet available:confused:) Anyway I have moved the wood supports out to the side and have had to add 1/2...

This problem has come up on the forum before a search should provide you with some information. The microwave in our Sundance has the same problem and it looks to be a ventilation problem . I took our unit out and set it on the counter and it runs fine producing no wecess moisture. The way our...

Sink Covers Just a little note of caution on those plastic covers for the sink. Be careful that you do not store them handy enough to the stove top that they could accidently fall on the stove top when cooking we had a near fire with ours . We had stood them up next to the edge of the...